INSTALLATION INSTRUCTIONS
Page 1 of 8
2019-2020 DODGE RAM 1500 AMBUSH SERIES FRONT BUMPER (NON-WINCH)
PART #DG-19343
PARTS LIST:
1 Front Bumper
2 12mm Triple Bolt Plates
1 Mesh Fill Panel
6 12-1.75mm x 45mm Hex Bolts
1 Driver/left Frame Bracket
18 12mm x 32mm x 3mm Flat Washers
1 Passenger/right Frame Bracket
12 12mm Nylon Lock Nuts
1 Driver/left Frame Support Bracket
4 10-1.5mm x 30mm Hex Bolts
1 Passenger/right Frame Support Bracket
4 10mm x 30mm x 2.5mm Flat Washers
2 LED “L” Brackets
4 10mm Lock Washers
2 License Plastic Plugs
4 8-1.25mm x 25mm Hex Bolts
2 Ram Sensor Wire Harness Extensions
2 8-1.25mm x 16mm Hex Bolts
6 Sensor Hole Plugs
8 8mm x 24mm x 2mm Flat Washers
6 Sensor Retaining Clips
4 8mm Lock Washers
6 Sensor Foam Spacer Washers
4 8mm Hex Nuts
6 Sensor Foam Front Seals
12 4-0.75mm x 10mm Button Head Allen Bolts
1 Sensor Cover Kit
1 4mm Wrench
2 14-1.50mm “Fine Thread” x 50mm Hex Bolts
1 2.5mm Wrench
2 14mm x 44mm x 3mm Flat Washer
10 Nylon Wire Ties
2 14mm Lock Washer
PROCEDURE:
REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. BUMPER IS HEAVY, ASSISTANCE IS HIGHLY
RECOMMENDED TO AVOID POSSIBLE INJURY OR DAMAGE TO THE VEHICLE.
(2) Plastic Plugs
(2) L/R Light
“L” Brackets
Driver/left
Frame Bracket
Mesh Fill Panel
Passenger/right
Frame Bracket
(6) Sensor Plugs
(6) Sensor Retaining Clips
Passenger/right
Support Bracket
Driver/left
Support Bracket
(2) 10mm Triple
Bolt Plates
(6) Sensor Foam Spacers
(6) Sensor Front Foam Seals
(2) Wire Harness Extensions
