continued . . .
The illustrations and descriptions herein are applicable to production as of the date of this Technical Data Sheet.
Revised 9/30/14 Intl. Printed in U.S.A.
The manufacturer reserves the right to, and does from time to time, make changes and improvements in designs and dimensions.
© 2014 by Bobrick Washroom Equipment, Inc.
Technical Data
MATERIALS:
Cabinet —
18-8, type-304, heavy-gauge stainless steel. All-welded construction. Exposed surfaces have satin finish. The activation sensor mounts on a
hinged, locking panel.
Doors —
18-8, type-304, 1.2mm (18-gauge) stainless steel. 14mm (9/16") 90° return for maximum rigidity. Secured to cabinet with a concealed, full-
length stainless steel piano-hinge. Equipped with a stainless steel cable door-swing limiter and two tumbler locks per door keyed like other Bobrick
washroom accessories.
Paper Towel Dispenser —
18-8, type-304, 0.8mm (22-gauge) stainless steel. Equipped with 90° return towel guide angle to prevent paper towels from
falling forward out when door is opened for servicing. Rounded towel tray has hemmed opening to dispense paper towel without tearing. Capacity: 600
multifold or 450 C-fold paper towels.
TowelMate™ Towel Rod Assembly —
Consisting of a round Nylon Rod and (2) stainless steel Rod Screws for attachment, is field replaceable.
Stainless steel Stop Screws (2) lock TowelMate Towel Rod assembly in place.
Waste Bin —
Leak-proof rigid molded plastic. Removable for servicing. Capacity: 13.7 liters (3.6 gal.).
Dryer:
Cover —
18-8, type-304, 0.8mm (22-gauge) stainless steel. Cover is secured to mounting base with two pan-head stainless steel screws.
Mounting Base —
1.5mm (20-gauge) plated steel with three 6mm (0.236") diameter mounting holes.
Motor —
Universal, 1/7 hp, 8000 rpm, on resilient mounting. Sealed ball bearing at drive-shaft end and self-lubricating sleeve bearing at nondrive end.
Equipped with automatic thermal-overload switch and a thermistor.
Fans —
Two balanced, double-inlet centrifugal fans are mounted on motor shaft; directs airflow over heating element at 71 cfm.
Fan Housing —
Fire-retardant black molded plastic.
Heating Element —
Two coiled nickel-chrome heating elements are mounted in mica frame and protected by automatic thermal-overload switches.
B-38030
230V
TrimLineSeries™
RECESSED PAPER TOWEL
DISPENSER, AUTOMATIC HAND
DRYER, AND WASTE BIN
(3-IN-1 UNIT)
Automatic Hand Dryer: 208–240V AC,
3.6-4.0 Amp, 750-950 Watts, 50/60 Hz, Single Phase VDE approved, CE marked, cUListed
Meets Electrical Safety Requirement: AS/NZS 60335.2.23:2004
396mm
15- 5/8"
S
S
S
S
S
S
Recommended Mounting Height Off Floor
for United Kingdom BS8300:2009
1567 to 1674mm 61-11/16" to 65-7/8"
219mm
8-5/8"
89mm
3-1/2"
Typ.
22mm
.88"
Diameter
Hole for
Between-Wall
Wirirng
1450mm
57-1/16"
Dryer
Sensor
Dryer
Outlets
Lock
& Key
Removable
Waste Bin
25mm
1"
Typ.
346mm
13-5/8"
Finish Face of Floor
Paper
Towel
Dispenser
96mm
3-13/16"
280mm
11"
Finish Face of Wall
14mm
9/16"
Typ.
280mm
11"
62mm
2-7/16"
407mm
16"
34mm
1-3/8"
Typ.
16mm
5/8"
22mm
.88"
Diameter
Hole for
Between-Wall
Wirirng
1398mm
55"
100mm
3-15/16"
Recommended Mounting Height Off Floor
for A
ustralian DD
A standar
ds,
AS1428.1-2009
1667 to 1774mm 65-5/8" to 69-13/16"
727mm
28-5/8"
Rough Wall Opening
362mm (14-1/4") wide
1412mm (55-9/16") high
100mm (4") minimum
recessed depth
