ENGLISH
PowerWalker VFI 1000-3000 TG/TB/TGS
Quick Guide
I.
Panel Description
II.
Button
Switch
Function
ON/Silence
Button
By pressing the ON-Button continuously for more than 1 second the UPS system is
turned on.
By pressing this Button an acoustic alarm can be deactivated in the battery mode.
By short touch this Button all acoustic alarms can be deactivated in all modes.
By pressing this Button the UPS can do the battery test in the Line mode or ECO
mode or CVCF mode.
OFF
Button
When mains power is normal, the UPS system switches to No output or Bypass
mode by pressing OFF-Button “ “, and the inverter is off. At this moment, if Bypass
is enabled, then the output sockets are supplied with voltage via the bypass if the
mains power is available.
By pressing this Button an acoustic alarm can be deactivated in the bypass mode.
Release the UPS from fault mode and EPO status.
Select
Button
The output voltage, frequency, Bypass disable/enable and operating mode in No
output or Bypass mode, Battery Ah, Battery remain time display disable/enable and
Charger current in all mode, could be selected by pressing Select-Button, and
confirmed by pressing Enter-Button.
Enter
Button
III.
Display
Display
Function
It indicates input voltage/frequency value, which are displayed alternately.
