Bluevirtu BSH-01, User Manual

Page: 1 / 7

Bluetooth stereo headset / BSH-01
Bluevirtu Motorcycle Communication System User Guide
Getting Started
•
BSH-01 controls - how to drive it
•
BSH-01 indicators - what they mean
•
BSH-01 sounds - what they mean
•
Understanding pairing - what it is, what it does
•
Multiple pairs - connecting with more than one other device
•
Pairing modes - what they mean, how to select them
•
Lets get pairing - step by step instructions
•
Pairing limitations - some traps to avoid
Typical operation- commonly used modes and operation
•
Channel priorities
•
Volume control
•
Intercom mode
•
Bluetooth phone
BSH-01 controls
There are 3 buttons on the BSH-01 .
Not many to control a number of setup and operating functions, so all buttons are 'over-loaded' with primary and
alternate functions depending on how long you activate them, and the current operating mode of the
BSH-01 .
•
Button A on the lower rear of the device
•
Button B on the lower centre of the device
•
Button C on the front outside face of the device
Button Momentary press Press and hold comments
A Volume up Normal listening mode
Power on/off Hold for about 5 seconds
Select pairing mode A Power up hold for about 8
seconds
Select pairing mode B Power up hold for about 11
seconds
Pair device 1 (BAT-01) In pairing mode A or B
B Volume down Normal listening mode
switch between device 1 (BAT-01) and
device 2 (phone) Normal Mode
Pair device 2 (phone) In pairing mode A or B
C Intercom on/off Device 3 (intercom) active
Phone voice
Dial/hangup Device 2 (phone) active
Audio mute/release Device 1 (BAT-01) active
Switch between device 1 (BAT-01) and
device 3 (intercom) Normal Mode
Pair device 3 (BSH-01) In pairing mode A or B
BSH-01 indicators
The BSH-01 has a red and a blue LED to indicate states and activity
Color Flash Meaning
None off
Blue every 8 seconds standby
Blue every 3 seconds connecting to device
Blue double flash every 3 seconds communicating with device
Blue rapid flashing searching for device
Red every 3 seconds low battery
Blue/Red slow alternating pairing mode A
Blue/Red fast alternating pairing mode B