Quick Installation Guide for LB8408A-R3, LB8405A-R3,
LB8406A, LB9005A-FO-R2, LB8415A & LB8418A
The pocket size Ethernet switch can be placed on desk top or be mounted on the wall based on the needs of network
environment. First, connect copper or fiber cable from computers or network segments to the TX/FX ports on the units.
Then assemble the power adaptor if necessary. The supplied universal power adaptor comes with multiple connectors that
can be deployed worldwide. Depends on your power outlet, use either the original two prongs plug or select the
appropriate adaptor to attach on the housing unit as shown in diagram 1 below. Plug DC connector into the DC jack at the
rear of the switch (figure 2), then attach AC connector into the power outlet. Please be noted that as with any electronic
device, you should place the switch where it will not be subject to extreme temperatures, humidity, or electromagnetic
interference.
Figure 1: Changing connectors on power adaptor (100-240V, 47-63Hz)
Figure 2: Rear view of LB8408A-R3
CUSTOMER
Order toll-free in the U.S. 24 hours, 7 A.M. Monday to midnight Friday: 877-877-BBOX
SUPPORT
FREE technical support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
INFORMATION
Mail order:
Black Box Corporation
, 1000 Park Drive, Lawrence, PA 15055-1018
Web Site: www.blackbox.com
y
E-mail: [email protected]
EU Clip
TOP CASE
US PLUG
UK Clip
BOTTOM CASE
EU Clip
PUSH RELEASE
LOCK
HOUSING
