background image

VEC1095ABD

USER’S MANUAL 

& WARRANTY INFORMATION

IMPORTANT SAFETY INFORMATION, SAVE THESE INSTRUCTIONS

TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONTAINS IMPORTANT
INFORMATION REGARDING THE OPERATION AND WARRANTY OF THIS
PRODUCT. PLEASE RETAIN FOR FUTURE REFERENCE.

www.vectormfg.com

12

FIVE YEAR LIMITED WARRANTY PROGRAM

This limited warranty program is the only one that applies to this product, and it sets forth all the

responsibilities of Vector Manufacturing, regarding this product. There is no other warranty, other than those

described herein.
This Vector Manufacturing product is warranted, to the original purchaser only, to be free of defects in

materials and workmanship for five years from the date of purchase without additional charge. The

warranty does not extend to subsequent purchasers or users. Manufacturer will not be responsible for any

amount of damage in excess of the retail purchase price of the product under any circumstances. Incidental

and consequential damages are specifically excluded from coverage under this warranty.
This product is not intended for commercial use. This warranty does not apply to accessories or damage to

units from misuse or incorrect installation. Misuse includes wiring or connecting to improper polarity power

sources.
RETURN/REPAIR POLICY: Defective products, other than accessories, may be returned postage prepaid to

manufacturer. Any defective product, other than accessories, that is returned to manufacturer within 30 days

of the date of purchase will be replaced free of charge. If such a product is returned more than 30 days

but less than five years from the purchase date, manufacturer will repair the unit or, at its option, replace it

free of charge.
If the unit is repaired, new or reconditioned replacement parts may be used, at manufacturer’s option. A

unit may be replaced with a new or reconditioned unit of the same or comparable design. The repaired or

replaced unit will then be warranted under the terms of the remainder of the warranty period. The customer

is responsible for the shipping charges on all returned items after 30 days. During the warranty period,

manufacturer will be responsible for the return shipping charges.
LIMITATIONS: This warranty does not cover accessories, bulbs, fuses and batteries, defects resulting from

normal wear and tear (including chips, scratches, abrasions, discoloration or fading due to usage or

exposure to sunlight), accidents, damage during shipping to our service facility, alterations, unauthorized

use or repair, neglect, misuse, abuse, failure to follow instructions for care and maintenance, fire, flood and

Acts of God.
If your problem is not covered by this warranty, call Technical Support at (800) 618-5178 for general

repair information and charges, if applicable. You may also contact us through our website at

www.vectormfg.com.
STATE LAW RIGHTS: This warranty gives you specific legal rights. Some states do not allow limitations on

how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages,

so the exclusions or limitations stated herein may not apply. This warranty gives the purchaser specific legal

rights; other rights, which vary from state to state, may apply.
TO REQUEST WARRANTY SERVICE FOR THIS PRODUCT: Contact Technical Support by telephone, fax or

mail (see below). We suggest that you keep the original packaging in case you need to ship the unit. When

returning a product, include your name, address, phone number, dated sales receipt (or copy) and a

description of the reason for return and product serial number. After repairing or replacing the unit, we will

make every effort to return it to you within four weeks.
WARRANTY ACTIVATION: Please complete Warranty Activation Card and mail to Vector Manufacturing.

Enter “VEC1095ABD” as Model and “25/10/2 Amp Smart Automatic Battery Charger” as Product Type.

All Vector products must be registered within 30 days of purchase to activate this warranty. Mail the

completed registration form, along with a copy of the original sales receipt to:

ATTN.: CUSTOMER SERVICE 

4140 SW 30th Ave., Ft. Lauderdale, FL 33312 

• TOLL FREE: (800) 618-5178 • FAX: (954) 584-5556 •

WARRANTY IS NON-TRANSFERABLE AND NON-REFUNDABLE.

BD050205

4140 S.W. 30th Ave., Ft. Lauderdale, FL 33312 U.S.

Toll Free: (800) 618-5178

© 2005 VECTOR MANUFACTURING

MADE IN CHINA

Fully Automatic Electronic

Smart Battery Charger

25 Amp / 10 Amp / 2 Amp Charge Rates

with 75 Amp Engine Start

VEC1095ABD_Manual_050205  5/5/05  6:35 PM  Page 12

Summary of Contents for VEC1095ABD









Reviews: