background image

    Manually Operated Hydraulic Stackers

STS15   

STS38

ST20(H)WW

STL25(H)

ST25(H)

ST30(H)WW

STL38(H)

ST38(H)

ST38(H)WN

STL50(H)

ST50(H)

ST50(H)WN

STL65(H)

ST65(H)

ST80(H)

ST80(H)WW

ST100(H)

ST100(H)WN

Read this manual carefully and understand completely before operating stackers. Keep filing this manual for
future reference. If this copy is lost, please contact your local supplier for a replacement.

      Warning !

 ◎ Hazard or unsafe practice which, if not avoided, may result in DEATH or SEVERE PERSONAL INJURY and

     PROPERTY DAMAGE.

 DO NOT load one fork more than

 NEVER sit, stand or ride on forks.

 or soft surface. Lifter may become  position. SEVERE PERSONAL

 other and DO NOT load tips on

 SEVERE PERSONAL INJURY or

 unstable and /or uncontrollable.

 DEATH could result.

 SEVERE PERSONAL INJURY and  could result.

 or DEATH could result.

 PROPERTY DAMAGE could result.

 NEVER go under forks. 

 DO NOT overload lifter. 

 SEVERE PERSONAL INJURY or

 DEATH could result.

 capacity and load center rating.

 of control and result in SEVERE

 bent, rusted or broken links.

 PERSONAL INJURY.

 DO NOT put hand near chain

 KEEP FEET CLEAR of rolling

 sprocket or other moving parts.

 wheels that could result in

 SEVERE PERSONAL INJURY

 SEVERE PERSONAL INJURY.

 could result.

     Caution !

 1. READ THIS OPERATION MANUAL COMPLETELY BEFORE USING AND THOROUGHLY UNDERSTAND AND FOLLOW All SAFETY

     INSTRUCTIONS. Wrongful use may result in accident.

 2. This stacker lifter is designed to use on smooth floor with balanced, stable, firmly stacked load that is within capacity and loading diagram.

     DO NOT use for any other purpose than its intended use.

 3. Stacker lifter shall be operated by TRAINED personnel only. OPERATOR shall read "Operation Manual" completely and thoroughly 

     understand the controls and operation of this equipment BEFORE oeprating the lifter.

 4. Do Not lower the fork with load with fast speed. Ot it may result in impact load and damage the stacker.

 5. ALWAYS observe lifter and ALWAYS stay at the controls while the lifter is in motion. RELEASE controls and STOP lifter immediately if load

     on the lifter appears to become unstable. NEVER leave the loaded lifter unattened unless the forks are fully lowered position.

 6. Set the parking brake and park the stacker when moving the load onto the fork. Or the unit may start to move all of a sudden during

    moving of the load and may result in falling of the load.

 7. DO NOT use lifter with unstable, unbalanced or loosely stacked load. Unbalanced loads may become unstable and fall. 

     SEVERE PERSONAL INJURY and PROPERTY DAMAGE could result.

 8. Do Not handle unsecured or unstable load that could fall backwards.

 9. Perform the inspection following to the instructions of Operation Manual.

10. Do Not alter or modify the stackers in any way.

11. Do Not use forks or lift as a hoist or to pull up the load.

      SEVERE PERSONAL INJURY and PROPERTY DAMAGE could result.

12. Keep the forks be widened equally in operation. Or it may result in damage to the unit and falling of the load.

13. ALWAYS keep feet, hands and fingers away from casters, load wheels and all moving components. SEVERE INJURY could result.

14. ALWAYS perform maintenance and inspection with lifter unloaded.

15. Do Not use Quick Lifting device when load is on the fork.

16. Do Not use Quick Lifting device with valve open. If valve is kept open, fork will fall down with faster speed when handle is released.

      And it may result in rotating of the handle and it is dangerous.

17. When Quick Lifting handle is not used, make certain handle is off the roll pin.

18. Do Not move too fast. Or it may result in the inability of the control of the unit.

19. The lifter is NOT waterproof and is intended to be used in a dry environment and at a moderate temperature range.

       - 1 -

Operation and

Service Manual

 ALWAYS stay within designated

 INJURY and PROPERTY DAMAGE

 ◎ Hazard or unsafe practice which, if not avoided, may result in MINOR or MODERATE PERSONAL INJURY and PROPERTY DAMAGE.

 forks. SEVERE PERSONAL INJURY

 inspection reveals excessive wear on

 links, pins, side plates and deformed,

 DO NOT use in areas of multi level

 floor surface that could create loss

 Always travel with forks in lowered

 DO NOT use lifter on slope, unlevel

 Replace chain every four years or if

Summary of Contents for STS15








Reviews: