background image

Hi-Fi H81S2 Setup Manual 

 

 

FCC Information and Copyright 

 

This equipment has been tested and found to comply with the limits of a Class B 
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses, and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. There is no guarantee that 
interference will not occur in a particular installation. 

 

The vendor makes no representations or warranties with respect to the contents 
here and specially disclaims any implied warranties of merchantability or fitness 
for any purpose. Further the vendor reserves the right to revise this publication 
and to make changes to the contents here without obligation to notify any party 
beforehand. 

Duplication of this publication, in part or in whole, is not allowed without first 
obtaining the vendor’s approval in writing. 

 

The content of this user’s manual is subject to be changed without notice and we 
will not be responsible for any mistakes found in this user’s manual. All the brand 
and product names are trademarks of their respective companies. 
 
 

 

 

   
 

 
 
 
 

 
Dichiarazione di conformità 
sintetica 

Ai sensi dell’art. 2 comma 3 del D.M. 
275 del 30/10/2002 
Si dichiara che questo prodotto è 
conforme alle normative vigenti e 
soddisfa i requisiti essenziali richiesti 
dalle direttive 
2004/108/CE, 2006/95/CE e 
1999/05/CE 
quando ad esso applicabili 

 
Short Declaration of conformity   

We declare this product is complying 
with the laws in force and meeting all 
the essential requirements as specified 
by the directives 
2004/108/CE, 2006/95/CE and 
1999/05/CE 
whenever these laws may be applied

 

 

 

 

Summary of Contents for Hi-Fi H81S2












































Reviews: