Turn on/off
Press Record key and Mode key for 3 seconds to turn on/off the device
ALT Gain
ALT Loss
Maximum ALT
Total ALT
Auto wake up : If there is any speed or viberation, the computer will wake up from sleep
mode.
Auto sleep : If there is no speed or viberation for 6 minutes, the computer will go into
sleep mode automatically.
Factory Default
In any page, press and hold Selet key for 3 seconds to clear the data, except for Odometer
and Total ALT, while recording, the data cannot be cleared.
Press Set key 3 seconds to go to set mode
Set key: Next setting
Mode key: Enter/Next step
Record key: select the option
Press Set key 3 seconds or wait for 30 seconds to exit setting.
Press Mode key to enter
Press Record key to select Power saving / Always on
Press Set key twice to set altitude.
Press Mode key to enter
Press Record key to select Auto Detect / Manual Set
Manual: Press Mode key to go to next step
Press Record key to choose number
Press Set key twice to set backlight.
Setting
Press Mode key to enter
Press Record key to select Button on / Always on / Always Off
Press Set key twice to set auto wake up.
Press Mode key to enter
Press Record key to select On / Off
Press Set key twice to set clock.
Press Mode key to enter
Press Record key to select Auto detect / Manual Set
Press Mode key to go to next step
Auto detect:
set 12/24H -> set Time zone -> set Daylight saving
Manual:
set 12H/24H -> set Clock -> set Date
Press Record key to select option
Press Set key twice to set unit.
Press Mode key to enter
Press Record key to select Metric / Imperial
Press Mode key to go to next step
Press Record key to select Celsius / Fahrenheit
Press Set key twice to set Odometer.
Press Mode key to enter and go to next dight
Press Record key to select number(0-999999 KM / 0-624999 mile)
Press Set key twice to set factory default.
Press Mode key to reset the data
Press Record key to select Yes; Press Mode key to select No
Press Record key to confirm
Press Set key twice to go to about.
Press Mode key to view the software version.
Press Set key 3 seconds or wait for 30 seconds to exit setting.
NOTE :
Select auto detect and turn on GPS, time information will be updated
by GPS signal automatically.
Function Change
GPS - 100
GPS - 100
Mode/Clear key
Press Mode key change mode.
NOTE: If turn on GPS, the device will capture location from the satellite
and calculate speed, distance, route, and other data.
