Replaces
Part Sheet
77-1722R-11
Part
Sheet
77-1722R-12
43P Airless Gun
Model: 6370-0000-6
Nozzle
SolveNt
PuRge
Safety
lock
The Binks Model 43P is a low to medium-volume plural
component (spray and/or pour) dispensing device designed
specifically for plural component systems. Capacity is up
to 20 lbs. spray using a patented static mixing principle.
The 43P, and its companion the 43PA (automatic), uses
the opposed internal orifices principle with no moving
parts (patented).
Spray patterns are by nozzle selection.
Gun output is dependent upon nozzle and impingement
orifices in conjunction with applied fluid pressures.
Impingement orifices usually are matched but may be
dissimilar to “balance” divergent viscosities and/or ratios.
The 18-8 stainless steel head is designed with cross-
drilled ports for ease of maintenance. The ports allow
access to remove impacted cured resins. Immersion in
solvent will not affect the PTFE seals.
Both resin (1/4 NPS) ports have check valves. The needle
valves share common parts (springs, housing, take-up nuts,
packings and followers) for simplicity. The resin needles
are ball type, the purge is tapered tip.
The rugged forged aluminum gun handle is anodized for
corrosion resistance. The trigger’s finger geometry affords
comfortable trigger pull and operation.
deScRiPtion
Summary of Contents for 43P6370-0000-6
Page 6: ...6 NOTES ...
Page 7: ...NOTES 7 ...
