GAT Handheld Coder GAT Pro+ User Manual
©2016 Bimmer Retrofit Inc.
GAT Handheld Coder Pro+ User Manual
Rev 1.2
READ INSTRUCTION CAREFULLY BEFORE USE
IF YOU HAVE ANY QUESTIONS ABOUT THE USE OF THIS DEVICE, CONTACT YOUR
BIMMER RETROFIT REPRESENTATIVE BEFORE USE
HANDHELD SHOULD ONLY BE USED WITH APPROPRIATE CABLES INCLUDED WITH THE KIT
HANDHELD CAN BE USED ONLY WITH BMW AND VAG* VEHICLES.
DO NOT OPERATE HANDHELD UNDER THE RAIN BECAUSE THIS DEVICE IS NOT WATER-
RESISTANT AND CAN BE DAMAGED BY WATER
DO NOT USE ANY SHARP OBJECTS TO OPERATE A TOUCHSCREEN. USE FINGER OR PLASTIC SIDE
OF A PEN TO TOUCH THE ONSCREEN BUTTONS. DO NOT PUSH HARD ON THE TOUCHSCREEN AS
IT MAY DAMAGE THE SURFACE
HANDHELD CAN ONLY BE CONNECTED TO THE VEHICLE USING SPECIAL OBDII CABLE OR TO THE
PC WITH USE OF THE MICRO-USB CABLE. OBDII CABLE IS INCLUDED WITH THE KIT
*VAG vehicles support is limited and depends on the current firmware version and vehicle model
