Instruction Manual
LED Dual Scanner WS-LD019
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused
by the non-observance of this manual or any unauthorised modifcation to the
equipment.
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorized modification to the equipment.
•Never let the power-cable come into contact with other cables. Handle the power-cable
and all mains voltage connections with particular caution!
•Never remove warning or informative labels from the equipment.
•Do not open the equipment and do not modify the equipment.
•Do not connect this equipment to a dimmer-pack.
•Do not switch the equipment on and off in short intervals, as this will reduce the system's life.
•Only use the equipment indoors.
•Do not expose to flammable sources, liquids or gases.
•Always disconnect the power from the mains when equipment is not in use or before cleaning!
Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
•Make sure that the available voltage is between 110v/240v.
•Make sure that the power-cable is never crimped or damaged. Check the equipment and the
power-cable periodically.
