background image

Cut here to remove. Do Not Tear!

WYOMING TRAIL 2 SET UP INSTRUCTIONS

1.     Remove contents from stuff sack. Spread tent body out on ground.

2.     Assemble the poles: one large pole with one hub, and one shorter pole. To 

ensure each pole section is fully seated insert each pole section into the next by 

hand instead of allowing the shock cord to snap them together.

3.     Position the main pole on top of the tent body, aligning it so that the color 

coded poles match up with the color coded webbing on the body. The SL model 

has green poles to match with green webbing and the Camp model has orange 

poles to match with orange webbing. 

4.     Insert the pole tip ends into the grommets at all four corners. NOTE: the vesti-

bule area is formed by webbing straps that extend from the tent body and the 

grommets at the vestibule corners will be on these webbing straps.

5.     Attach the H Clips on the tent body to the Swivel CHL on the poles.  Then attach 

the other plastic clips on the tent body to the poleset.

6.     Install the remaining shorter pole so that it crosses over the tent body and the 

pole structure that is already set up.  Insert the pole tips into the remaining 

grommets on the side of the tent. 

7.     Attach this pole into the top of both Swivel CHLs and flip the lever over the pole. 

Attach the other plastic clips on the tent body to the pole.

8.     Stake out the six webbing loops where the poles are inserted into the grom-

mets.   

9.     Drape the rainfly over the tent body aligning it so that the color coded buckles 

match up with the color coded webbing on the body. 

10.     Make sure the webbing at the corners of the rainfly is completely slackened. 

Attach the buckles on the rainfly to those on the tent body. 

11.     Attach all Velcro loops on the underside of the fly to the corresponding poles 

for the best stability.

12.     Stake out the second vestibule doors on the Camp model.

13     Evenly tension the webbing on each corner as needed to keep the rainfly taut.

14.     Stake out all guy lines.

Separate 6”, large diameter pole segment included for emergency  

field repair. Slide repair pole over the break to act as a splint.

FAST FLY SET UP INSTRUCTIONS

If you purchase the optional Big Agnes footprint for your Wyoming Trail, it will en-

able you to pitch a Fast Fly shelter while leaving the tent body behind. The Fast Fly 

configuration requires the footprint, rainfly, poles and stakes.

1.     Lay the footprint on the ground and stake out.

2.     Assemble the poles: one large pole with one hub, and one shorter pole. To 

ensure each pole section is fully seated insert each pole section into the next by 

hand instead of allowing the shock cord to snap them together.

3.     Position the main pole structure on top of the footprint, aligning it so that the 

color coded poles match up with the color coded webbing on the footprint. The 

SL model has green poles to match with green webbing and the Camp model 

has orange poles to match with orange webbing. 

4.     Insert the pole tip ends into the grommets at the four corners of the footprint.  

5.     Install the remaining shorter pole so that it crosses over the pole structure that is 

already set up.  Insert the pole tips into the remaining grommets on the side of 

the tent. 

6.     Attach this pole into the top of both Swivel CHLs and flip the lever over the pole.  

7.     Drape the rainfly over the standing poles, aligning it so that the color coded 

buckles on the fly match up with the color coded webbing on the footprint. 

8.     Make sure the webbing at the corners of the rainfly is completely slackened. At-

tach the buckles on the rainfly to those on the footprint. 

9.     Attach all the Velcro loops on the underside of the fly to the corresponding poles 

for the best stability.

10.     Stake out the six webbing loops where the poles are inserted into the grom-

mets.   

11.     Stake out the second vestibule doors on the Camp model.

12.     Evenly tension the webbing on each corner as needed to keep the rainfly taut. 

This will also help keep the poles in place.

13.     Stake out all guylines.

Wyoming Trail SL 2

Tent Body

Wyoming Trail 2 Camp

Tent Body

Wyoming Trail SL 2

Tent with Fly

Wyoming Trail 2 Camp

Tent with Fly

H Clip

Stopper

Swivel CHL

Hardware:

Reviews: