SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5
6
e
s
s
a
r
t
S
r
e
s
u
k
r
e
v
e
L
ax +49 (0) 2191 / 46438-40
e
d
.l
h
a
t
s
w
s
@
o
f
n
i
:l
i
a
M
-
E
d
i
e
h
c
s
m
e
R
7
9
8
2
4
-
D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 1977
Hydraulic Jack
TECHNICAL DATA
item
capacity
min. hight
max. hight
spindle
length
lifting hight
1977
2 t.
210 mm
520 mm
65 mm
245 mm
WARNING AND SAFETY INFORMATION
This lifter may only be used if you have read and understood the manual. Always follow the
manual.
Never exceed the mentioned lifting load.
Use only on hard, flat level surface.
The brakes of the vehicle must be locked and the steering wheel must be in a straight position.
The jack is designed only for lifting, after lifting; the car must be placed on axle stands
Make sure that the vehicle may be raised only at the vehicle manufacturer's specified points.
When raising no person must be inside, on or under the vehicle.
Only use original tube for lifting, do not use any extension bars
Any changes or modifications to the jack are forbidden
Failure to observe these warnings may lead to serious physical and / or property damage
MAINTENANCE
Lubricate the ram. linkages, saddle and pump mechanism with light oil.
Visually inspect for cracked welds, bent, loose, missing parts or hydraulic oil leaks
The product shall be inspected immediately if it is believed to have been subjected to abnormal
load or shock.
Any hydraulic jack found damaged in any way, is found to be worn or operates abnormally shall
be removed from service until repaired by an authorized customer service.
Clean all surfaces and maintain all labels and warnings.
Check the ram every three months for any sign of rust or corrosion.
Clean as needed and wipe with an oil cloth.
When not in use, always leave the saddle and ram all the way down.
