02632 Mobile Antenna Installation Instructions
(Page 1)
Sedan Mounting
Remove the base locking nut from the antenna mounting base assembly body.
Insert the threaded neck of the mounting base assembly thru the centre of the Z bracket hole.
Relocate the locking nut over the thread on the mounting base assembly and using a spanner,
tighten the locking nut until it sits down on top of the Z Bracket.
Fit the Z bracket to the vehicle as per instructions (supplied with bracket).
Route the feed cable through the vehicle to the appropriate location and fit mating adaptor to suit
radio.
Position the antenna onto the mounting base assembly and screw home until tight.
Check the VSWR to ensure that the connector has been fitted correctly.
Other mountings are available for this antenna - please refer to page 2
.
Antenna Mounted
on Z Bracket
Model 02734
Bull Bar Mounting
For Bull Bar mounting it is recommended that the antenna be located onto the
Benelec bracket models 02730,02731, or 02732 -
see page 2.
Fit the bracket to the vehicle as per instructions.
Remove the base locking nut from the antenna mounting base assembly body.
Insert the threaded neck of the mounting base assembly thru the centre of the
bracket hole. Relocate the locking nut over the thread on the mounting base
assembly and using a spanner, tighten the locking nut until it sits down on top of the
bracket.
Position the antenna onto the mounting base assembly and screw home until tight.
Route the feed cable through the vehicle to the
appropriate location and fit mating adaptor to suit radio.
Check the VSWR to ensure that the connector has
been fitted correctly.
ANTENNA MOUNTING BASE ASSY
Antenna Mounted
on Bracket
Model 02732
Antenna Mounted on Bracket
Model 027303
Antenna
BENELEC
Base Locking Nut
Base body
Feed cable
Adaptor
BENELEC.COM.AU
