background image

BAYCO • 640 South Sanden Blvd. • Wylie, TX 75098 • 1-800-233-2155 • www.baycoproducts.com

 

 

 

INS-1082-12 

 

1500 Watt (2 x 250 and 2 x 500 watts) 

 Halogen Work Light 

Important safety instructions 

 

WARNING: Read all instructions carefully 

SAVE THESE INSTRUCTIONS 

CAUTION: RISK OF ELECTRICAL SHOCK 

 

 

Do not use with extension cord near water or where water may 
accumulate. 

 

Keep plugs and receptacles dry. 

 

For use only on GFCI protected circuits. 

 

Risk of burns, do not operate without guard. (See assembly instructions.) 

 

Lighted lamp is hot. Keep away from combustibles. Unplug to change 
bulb. Do not touch bulb 

 

WARNING

 

RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE 

TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS 

 

Unit operates on 120V AC 60 Hz only 

 

Unplug and allow cooling before replacing bulb. 

 

Bulb gets HOT quickly 

 

Do not touch hot lens guard or enclosure. 

 

Do not remain in light if skin feels warm. 

 

Do not look directly at lighted lamp. 

 

Keep lamp away from materials that may bum. 

 

Use only with a 250 / 500 Watt or 
smaller type T bulb. 

 

Do not touch the bulb at any time; 
use a soft cloth or gloves. Oil from 
skin may damage bulb. 

 

Do not operate the lamp with 
missing or damaged guard, lamp 
containment barrier or UV light 
filter. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

SAVE THESE INSTRUCTIONS 

WARNING: When using outdoor use work lights, basic safety precautions 
should always be followed to reduce the risk of fire, electrical shock, and 
personal injury, including the following: 
 

 

Use only three-wire outdoor extension cords that have three-prong 
grounding plug and receptacles that accept the appliance's plug. 

 

Ground Fault Circuit Interrupter (GFCl) protection should be provided on 
the circuit(s) or outlet(s) to be used for the wet location work light. 
Receptacles are available having built-in GFCI protection and are able to 
be used for this measure of safety. 

 

Use only an extension cord for outdoor use, such as an extension cord of 
cord type SW, SW-A, SOW, SOW -A. STW, STW-A, STOW. STOW-A. 
SlW, SlW-A. SlOW. SlOW-A. SJTW. SJTW-A. or SJTOW, SJTOW-A. 

 

BULB INSTALLATION AND REPLACEMENT 

DO NOT TOUCH BULB WITH BARE HANDS 

1.

 

Turn the light off and unplug from the power source. 

2.

 

Allow the fixture to fully cool before proceeding. 

3.

 

Always wear gloves or use a clean cloth to handle bulb. The natural oil 
from skin will leave a residue that will cause the light to burn out 
immediately. 

4.

 

To remove the lens cover, remove the retaining screw on the back of the 
cover. The lens cover will then swing open exposing the bulb.  

5.

 

To remove the bulb, grip one end of the bulb and gently push towards the 
other end and pull outward to release the bulb. 

6.

 

Using a clean cloth or wearing gloves to hold the bulb, gently insert one 
end of the bulb into the receptacle and press firmly into place. Place the 
other end of the bulb into the opposite receptacle and gently press into 
place. Make sure bulb is seated properly. 

7.

 

Close the lens cover and replace the retaining screw. 

8.

 

Do not test light without lens cover and guard properly attached. 

WARNING: Read all instructions carefully 

SAVE THESE INSTRUCTIONS 

CAUTION: RISK OF ELECTRICAL SHOCK 

 

WARRANTY 

PRODUCTS COVERED UNDER THIS LIMITED WARRANTY: 
This product is warranted to the original purchaser for 1 year and only covers 
failures due to defects in materials or workmanship. If this product is used for 
rental purposes, the warranty term is reduced to 90 days from the date of 
purchase. 
 
NOT COVERED 
The warranty does not cover normal wear and tear or cosmetic damage. The 
Limited Warranty also does not cover damages which occurred in shipment or 
failures which are caused by accidents, misuse, abuse, faulty installation and 
lightning damage. Consequential damages, incidental damages or incidental 
expenses, including damage to property. Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above 
limitation or exclusion may not apply to you. This warranty gives you specific 
legal rights, which may vary from state to state. This warranty does not apply to 
certain Bayco professional products that carry a specific warranty unique to 
those products. 
 
WARRANTY CLAIMS - USA 
Contact Bayco for USA warranty claims. Call 800-233-2155 and Bayco 
Customer Service will provide a Return Goods Authorization (RGA) to facilitate 
rapid warranty action. After receiving the RGA, send the product (shipping 
prepaid) to BAYCO • 640 S. SANDEN BLVD • WYLIE, TEXAS • 75098. Include 
a dated proof of purchase and a brief description of the defect with your name, 
address and phone number. Your product will either be repaired or replaced at 
the option of Bayco and returned as soon as practical, but no later than 45 
days after being received by Bayco. 
 
WARRANTY CLAIMS - CANADA 
Return the product to the place where purchased with a dated proof of 
purchase and a brief description of the defect with your name, address and 
phone number. Your product will either be replaced or purchase price 
refunded. 
 
REQUEST FOR WARRANTY ACTION 
If you have any questions about this warranty or any other Bayco product 
inquiries contact BAYCO • 640 S. SANDEN BLVD • WYLIE, TEXAS • 75098 or 
call 800-233-2155 
 
 
 
 

Reviews: