Instructions
Specification
DC 3V 150mA
Adaptor: AC 220-240V ~ 50Hz
WARNINGS / IMPORTANT
1.
Read the instruction manually thoroughly before using the device.
2.
It is recommended for one person use only. For hygienic reason, the attachments should not
be shared with others
3.
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning the use of the appliance by a person responsible
for their safety.
5.
Regularly check the blade condition, if damaged or worn replace, failure to do so may cause
skin irritation.
6.
Do not use if skin is red, irritated, inflamed, infected or blistered.
7.
Domestic/ Household use only.
8.
Do not place or store your unit or adaptor in direct sunlight. Store only in a cool dry place.
9.
Keep your unit out of reach of children as it is not intended for use by children.
10.
This appliance is not to be used on, by or near children or invalids.
11.
Do not disassemble this device.
12.
After cleaning ensure the trimmer is completely dry before using.
13.
Do not use in the bath, shower or near water or liquids, this product is not waterproof.
14.
If storing for any length of time remove the battery.
15.
Before removing the battery the trimmer must be disconnected from the power source.
16.
Do not wrap the cord around the trimmer, damage may occur resulting in reduced product
performance and possible personal injury.
17.
Charge only in a dry area, do not charge in direct sunlight or close to sources of heat.
18.
Only handle the appliance with dry hands when using and when charging.
19.
Do not let the cord overhang a work surface or unit where it may become entangled and
cause injury or damage to the trimmer.
CHARGING THE TRIMMER
1.
Before first use, attach AC adaptor to mains and charge for sixteen (16) hours.
2.
Once fully charged, the trimmer can be used for up to 45 minutes.
3.
It is recommended to charge the trimmer if you feel a change in the power/item slowing in
use.
4.
Push the switch to
“OFF”.
5.
Plug the adaptor into the mains socket/supply.
