![background image](http://html1.mh-extra.com/html/barlow-tyrie/9111210/9111210_assembly-instructions-manual_3878677001.webp)
BAR LOW T Y R IE
quality since 1920
3.66 x 4.5m - 12’ x 15’ Pavilion Shelter with Double Rail Beams
Ref: 9011215
Step by Step Assembly Instructions
P
avilions
Before you begin
These installation instructions will lead you through the process of installing your new pavilion.
The installation of the pavilion requires special attention to certain detail. Before you begin you
should:
Check your order
Make sure the contents of the carton match the product numbers on your
order. Contact your dealer if there are any damaged, missing or incorrect parts.
Pay attention to safety
Because of the size and weight of certain parts, installation is
recommended with no fewer than two people. Always maintain a clean, organized work area.
Make sure you have the right tools and materials
Barlow Tyrie supplies the appropriate
fasteners upon request through your dealer for anchoring the pavilion securely to the ground.
If you are unsure about the required anchoring system best suited for your pavilion consult your
dealer for the proper fastening method.
Review entire installation guide
This step gives you the opportunity to contact your dealer to
answer any questions before you begin.
Assembly requirements
Two
people
Spirit level
Hand drill
Screwdriver set
Step
ladder
Long nose pliers
Spanners
Rubber hammer
Tape measure
www.teak.com
Page 1 of 16
Step by Step Assembly Instructions
3.66 x 3m - 12’ x 10’ Pavilion with Cabrio Folding Roof
Product Ref: 9111210