p/n 8451R001 EIR208 3409qsg-1/2
© 2009 by B&B Electronics. All rights reserved.
International Headquarters:
815-433-5100
www.bb-elec.com
European Headquarters:
+353 91 792444
www.bb-europe.com
B&B
ELECTRONICS
QUICK START GUIDE
Package Contents
•
EIR208 Series Industrial, Unmanaged, Ethernet Switch
•
Quick Start Guide (One per shipment)
•
Power Terminal Block (installed)
•
Fiber Optic Dust Covers (installed on fiber optic models)
If any item is missing or damaged, contact B&B Electronics
for a replacement
Front Panel
1
Power Terminal Block
2 Position, Removable
2
PWR LED
ON When Power Applied
3
Fiber Optic SPD LED
Normally OFF (100BaseFx)
3
Fiber Optic LINK LED
ON when Fiber Port Linked
4
RJ45 LINK LED
ON when RJ45 Port Linked
Flashes When Data Transmitted
4
RJ45 SPD LED
ON if 100 mbps
5
RJ45 Ports
Number depends on model
6
Fiber Ports
Number and type depends on Model
DIN Rail Mounting
1. Slide and hold the DIN clip toward the bottom of the
switch. Angle the top portion of the DIN mount over the
top of DIN Rail.
2. Move the switch so that it is parallel with the DIN Rail.
3. Let go of the DIN Clip. The spring should return it to its
original position.
Attach Power Leads
External Supply Required
1. Loosen the screw to open the terminal block lead clamp.
2. Insert the power lead. TB will accept 16-28 AWG wire.
3. Tighten the screw to close the terminal block lead clamp.
Ensure the clamp holds the lead securely. However, do not
over tighten.
NOTE: For Replacement Terminal Block Order Part #7444.
EIR208 Series Quick Start
Guide
EIR208 (3 Fiber, 4 RJ45)
EIR208 (8 RJ45)
Power input: 10 to 48 VDC, 5.8W maximum, Class 2
Surrounding Air Ambient Temperature: 0 to 55° C
