background image

 

 

 

BAND-IT-IDEX, Inc. 
A Unit of IDEX Corporation 
4799 Dahlia Street 
Denver, CO 80216-3070 USA 
P: 1-800-525-0758 
F: 1-800-627-3925

 

Document # P45087 rev. E 

© Copyright 

BAND-IT-IDEX, Inc. 2002

All rights reserved

www.BAND-IT-IDEX.com

 

Page 1 of 3 

C002 JR

Hand Tool

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Operating 
Instructions 

NOTE: USE OF VISE IS OPTIONAL

Place BAND-IT tool in vise. Insert Clamp in Tool and
grip end of band by Band Gripper Lever. 

Insert hose in clamp. Take up clamp by turning the
handle of BAND-IT TOOL clockwise. To feel
movement of band, place finger on BAND-IT BAND 
at buckle edge while tensioning with tool handle.
When you no longer feel band moving through
buckle, even as you turn handle, MAXIMUM
PRESSURE IS EXERTED BY BAND-IT BAND, and
you should stop turning handle. 

Roll hose over approximately 30

°

 BACKING OFF 

TENSION HANDLE ¼ to ½ turn only, through course 
of rollover, depending on type and size of hose. Grip 
buckle with hook in nose by pushing cutter handle. 
Push cutter handle farther to cut the band completing 
BAND-IT JR. Clamp. 

The finished BAND-IT JR. Clamp –  

To Install a BAND-IT Junior Clamp: 

1

3

4

Reviews: