1
/
4
www.baltled.com
26
th
October, 2018
© 2018, All rights reserved BaltLED, UAB. Specifications are subject to change without notice.
FULMAR INDUSTRIAL LUMINAIRES
INSTALLATION GUIDE
READ THE INSTRUCTIONS CAREFULLY BEFORE STARTING
INSIDE THE BOX
WARNING
NEEDED FOR MOUNTING
•
Properly ground electrical enclosure.
•
Perform installation in dry location only.
•
Luminaire may fall down if not installed properly.
•
Avoid direct eye exposure to the light source while it is on.
•
For indoor use only.
•
Do not operate luminaire with damaged parts.
•
To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
•
The manufacturer shall not be liable for any damage
resulting from inappropriate modifications to the
luminaire or faulty installation.
If you have any questions, contact the manufacturer.
*Fulmar luminaires are the same height except for Fulmar H 120
and Fulmar HT 120, which H = 100 mm
L,
mm
W,
mm
H,
mm
252 / 277 / 520 / 1007 / 1010 / 1506 / 2010
75
75*
! Turn power off before inspection, installation or removal.
