background image

PRODUCT NAME: Calvin Arc Floor Lamp

ITEM NUMBER: LL309

DIMENSIONS OF ITEM ASSEMBLED: 

54”H x 63”W 

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

Page 1 of 4

Customer Service: 800-367-2810

Online: www.ballarddesigns.com

MADE IN CHINA

IMPORTANT SAFETY INSTRUCTIONS:

-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk 

of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in 

the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an 

extension cord unless plug can be fully inserted. Do not alter the plug.
-These Assembly Instructions are provided for your safety. It is important that they are read carefully 

and completely before assembling this Lamp.
-This product must be installed with the applicable installation code by a person familiar with the 

construction and operation of the product.

-This Lamp has been rated for up to 

100 Watt MAX Type A Bulb (NOT Included).

WARNING:

-Deviation from these Assembly Instructions may result in a risk of fire or electric shock.
-To reduce risk of fire, electrical shock, or personal injury, always turn off and unplug Lamp and 

allow it to cool prior to replacing the bulb.
-Do not touch the bulb when the Lamp is turned on. Do not look directly at the lit bulb.
-Keep flammable material away from the lit bulb.

Summary of Contents for Calvin

Page 1: ...ss plug can be fully inserted Do not alter the plug These Assembly Instructions are provided for your safety It is important that they are read carefully and completely before assembling this Lamp This product must be installed with the applicable installation code by a person familiar with the construction and operation of the product This Lamp has been rated for up to 100 Watt MAX Type A Bulb NO...

Page 2: ... and installation is complete to avoid accidentally discarding small parts or hardware Recommended Location for Use Dry Indoor Environment Assembly Time 20 Minutes People Required 2 people Tools Required Screwdriver PARTS Check to make sure you have the following INCLUDED 1 Pole A 1 Stem B 1 Chain Rod C 1 Clip E 1 Pad F 1 Base D NOT INCLUDED Page 2 of 4 1 100 Watt Max Type A Bulb Stem Base 1 Shade...

Page 3: ...crew the Pole A into the Stem B until tight Then screw the Stem into the Base D Slowly pull the wire out of the bottom of the base STEP 2 Screw the Rod C into the Pole A until tight Adjust the Pole to your desired height Attach the end of the Chain to the Stem B as shown Customer Service 800 367 2810 Online www ballarddesigns com B A D C A B ...

Page 4: ...he Pad F onto the bottom of the Base STEP 4 Unscrew the socket ring to attach the Shade G to the Pole A Then secure the Shade into place by screwing the socket ring back on Screw in the Bulb This Lamp has been rated for up to a 100 Watt MAX Type A Bulb NOT included Customer Service 800 367 2810 Online www ballarddesigns com Cleaning Care To clean wipe the Fixture with a soft dry cloth Avoid the us...

Reviews: