Giant X10 Quick Setup Guide
- Specification
- PSU
We recommend 850watt PSU or higher for making sure a sufficient output. (but like if you
only intend to use Skein, then you can buy a lower PSU. )
Note that each miner can only be powered by one single PSU. (it is okay to use 1 big PSU for 2
miners )
- Installation
You only have to prepare
1 * internet cable, 6 * 12V_6Pin connector .
Take into consideration some PSU may don
’
t have such this connectors, we will send 3 extra
connector switcher.
X 3
X 3
Internet
6 Power connectors
Summary of Contents for Giant X10
Page 5: ......
