1
1. Connects the IP camera to switch/hub and power on first.
2. Make sure the IP camera is in factory default setting. Please refer to IP camera
’s
user manual for resetting factory default.
3. The switch/hub is that connects with IP camera and DVR/NVR, please turn off
DHCP function if switch/hub has enabled before.
AVer DVR/NVR can connect up to 4 IP cameras through the LAN network connection and without any
configuration.
The following lists are supported DVR, NVR, and IP camera:
DVR
4/8/16CH EH Nano/Nano
+
series
NVR
EXR6004 mini
IP Camera
SF2012H series, SF2111H series
1.
For 4/8/16CH EH Nano/Nano
+
series DVR, please do the pre-configuration on the channel that is
going to connect the IP camera.
2.
Power on the DVR unit and login the DVR system. Next, select
Setup
>>
Camera
in preview
mode.
3.
In Camera setting, select the channel that wants to connect IP camera and mark the
Enable
to
enable the channel, then, select the camera
Input
is
IP camera
. Then, click
OK
to save the
configuration.
AVer DVR/NVR
+
SF2012H/SF2111H series IP Cameras
Quick Installation Guide
