![background image](http://html1.mh-extra.com/html/autostart/as-6320-fm/as-6320-fm_wiring-manual_3022895001.webp)
Programming Options
Mode 1
*indicates default setting
Function 1 – Ignition-Controlled Door locks
OPTION 1* Ignition Lock disabled
OPTION 2
Ignition lock enabled
OPTION 3
Ignition unlock only
OPTION 4
Ignition lock only
Function 2 – Secure Lock
OPTION 1*
Secure Lock disabled (1-sec. disarm pulse.)
OPTION 2
Secure Lock enabled in smart mode.
OPTION 3
Secure Lock disabled (0.5 Sec disarm pulse)
OPTION 4
Secure Lock enabled in normal mode.
OPTION 5
Standard secure lock enabled (no rearm pulse when
ignition is on)
Function 3 – Door Locks Pulse Timing
OPTION 1*
7/10 second lock/unlock pulses.
OPTION 2
4 seconds lock/unlock pulses.
OPTION 3
7/10 seconds lock pulse and two 1/4 second unlock
pulses.
OPTION 4
1/10 second lock/unlock pulses.
Function 4 – AUX 3 Programming
OPTION 1*
Constant while the
TRUNK
button is pressed
OPTION 2
1-sec. Trunk 1 output when
TRUNK
button pressed
for 3 sec. while Ignition is OFF and data output.
OPTION 3
TRUNK
with disarm/rearm (shock is ignored while
zone 3 is opened.)
OPTION 4
TRUNK
1 sec output ON/OFF
Function 5 – AUX 2 Programming
OPTION 1*
Priority Door access (Pressing
UNLOCK
a 2nd time
triggers AUX 2)
o
Car Finder enabled (pressing
SHIFT
and then
LOCK
triggers Car Finder)
o
The Driver’s Door unlocks upon the 1st
pressing of the
UNLOCK
button;
o
All Doors unlock on any subsequent pressing
of the
UNLOCK
button.
OPTION 2
Toggle ON/OFF with a 30-second timeout (press
SHIFT
and then
LOCK
) Car Finder disabled.
OPTION 3
Constant output while pressed (press
SHIFT
and then
LOCK
) Car Finder disabled.
OPTION 4
Priority Door access on 2
nd
Unlock, and Car Finder
enabled.
x
The Driver’s door unlocks upon the 1
st
, 3
rd
, 5
th
…
pressing of the
UNLOCK
button.
x
All Doors unlock upon the 2
nd
, 4
th
, 6
th
… pressing of
the
UNLOCK
button.
Mode 2
*indicates default setting
Function 1 – N/A
OPTION 1
N/A
OPTION 2*
N/A
OPTION 3
N/A
Function 2 – Safe Start
OPTION 1
Safe Start enabled
OPTION 2*
Safe Start disabled
OPTION 3
Swap Start – increased safety mode:
To Start: press
SHIFT
and then
LOCK
buttons.
Press the Start button to activate Aux 2.
Function 3 – Engine Run Time
OPTION 1
Run time - 4 minute in Gas mode / 9 minutes Diesel
mode.
OPTION 2* Run time - 15 minute in Gas mode / 20 minutes Diesel
mode.
OPTION 3
Run time - 25 minute in Gas mode / 30 minutes
Diesel mode.
Function 4 – Idle/Turbo Mode
OPTION 1
Idle/Turbo Mode disabled
OPTION 2* Turbo Mode enabled
OPTION 3
Turbo Mode disabled
Function 5 – Engine Type and Cold Weather Mode
OPTION 1
Diesel Engine Mode and 20-minute run time in Cold
Weather Mode.
OPTION 2* Gasoline Engine Mode and 4-minute run time in Cold
Weather Mode.
OPTION 3
Diesel Engine Mode and 9-minute run time in Cold
Weather Mode.
Mode 3
*indicates default setting
Function 1 – Siren Chirps
OPTION 1
Warning Chirps only; Lock Confirmation if the Lock
button is press 2nd time.
OPTION 2*
Chirps enabled.
OPTION 3
Chirps enabled with Open-Zone notification.
(Siren warning 10 sec. after arming if a door is left
open)
(Also used for vehicles with Dome Light Delay).
OPTION 4
Chirps disabled and Lock confirmation if the Lock
button is press 2nd time.
Function 2 – Passive Or Active Arming
OPTION 1
Active Arming
OPTION 2*
Passive Arming (30 sec.)
OPTION 3
Passive Arming (30 sec.) / no TWO-STAGE
DISARM
OPTION 4
Active Arming with Disarmed Notification.
Function 3 – Ignition Monitoring: Siren Mode / Horn Mode
OPTION 1
Siren Mode: Ignition Monitoring – disabled.
OPTION 2*
Siren Mode: Ignition Monitoring – enabled.
OPTION 3
Horn Mode: Ignition Monitoring – disabled.
OPTION 4
Horn Mode: Ignition Monitoring – enabled.
Function 4 – Shock Sense / Warn Away
OPTION 1
Shock Sense - Ignored / Warn Away – ignored
OPTION 2* Shock Sense - monitored / Warn Away – monitored
OPTION 3
Shock Sense - Monitored / Warn Away – ignored
OPTION 4
Shock Sense - Ignored / Warn Away – monitored
Function 5 – Ignition Valet
OPTION 1
Ignition Valet - DISABLED
OPTION 2* Ignition Valet - ENABLED
OPTION 3
Ignition Valet – ENABLED
Mode 4
*indicates default setting
Function 1 – MULTI-LEVEL FEATURES
OPTION 1
Multi-car Features, Basic Features, Customized
Features
OPTION 2* Basic Features, Multi-car Features, Customized
Features
OPTION 3
Customized Features, Multi-car Features, Basic
Features
OPTION4
Basic Features, Customized Features, Multi-car
Features
AS-6320FM
PROGRAMMING OPTIONS AND WIRING DIAGRAM