![background image](http://html1.mh-extra.com/html/automatic-technology/smart-phone-control/smart-phone-control_installation-instructions_3021683001.webp)
Wireless Smart Hub Installation Instructions
Smart Phone Control Kit
TRANSCEIVER KIT NTR-1V1 - ORDER NO. 14825
ITEM DESCRIPTION
QTY
1
NETWORK TRANSCEIVER NTR-1V1 AY
1
2
TIMING HARNESS 400MM VR12 AY
1
3
TAPTITE SCREW “P” M4 X 12
2
4
VELCRO 20 X 50
1
Garage Door Openers
Doc # 160064_04
Part # 13453
Released 28/11/18
This device allows for unattended operation of the door when not in line-of-sight of the door
opener.
The door may operate unexpectedly
, therefore do not allow anything to stay in or near the path of the door.
When the door is not operating automatically, watch the door when it is moving and keep people away until
the door is completely opened or closed.
Contact with the moving door can cause serious personal injury
or damage to property.
Your opener must be fitted with
SAFETY BEAMS
. Safety Beams detect any obstructions in the door’s
path and override automatic operation if one presents. These must be installed as in accordance
with UL 325 and CSA C222.2 No 247.
This is in addition to regular professional servicing, and monthly obstruction tests as detailed in your
opener’s Home Owners Manual.
CLASS B DEVICE CAN ICES-3 (B)/NMB-3 (B)
This equiment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encourage to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment and receiver
•
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•
Consult the dealer or experienced radio/TV technician for help.
Changes or modifications not expressly
approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
To comply with FCC/IC RF exposure limits for general population / uncontrolled exposure, the antenna(s) used for this transmitter must be installed
to provide a separation distance of at least 7.87in (20cm) from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.
The compliance to FCC radiation exposure limits for an uncontrolled environment, and a minimum
of 20cm separation between antenna and body.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.