background image

IMPORTANT SAFETY INSTRUCTIONS

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THE UNIT TO RAIN OR MOISTURE.

TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE

CABINET.

REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

INFORMATION (For the Customers in U.S.A)

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits

are designed to provide reasonable protection against harmful

interference in a residential installation.  This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference

will not occur in a particular installation.  If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet that is on a circuit different

from the one the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

For the Customers in the United Kingdom and/European

Countries

This Compact Disc player is

classified as a CLASS 1 LASER

product.

The CLASS LASER PRODUCT label

is located on the bottom exterior.

For the Customers in Canada

This apparatus complies with the Class B limits for radio noise emissions

set out in radio interference regulations.

CAUTION

The use of optical instruments with this product will increase eye hazard.

On safety

As the laser beam used in this compact disc player is harmful to

the eyes, do not attempt to disassemble the casing. Refer servicing to

qualified personnel only.

Do not put any foreign objects in the safety slot inside the disc

compartment. If you do so, the laser beam may come out when the lid is

opened.

Do not put any foreign objects in the DC IN 6V (external power input) jack.

Should any solid objects or liquid fall into the unit, disconnect the power

supply and have the unit checked by qualified personnel before operat-

ing it any further.

On operation

Since the CD system offers a wide dynamic range, the peaks of the high

level inputs are recorded with high fidelity, and the noise level is very

low. 

Do not turn up the volume while listening to a part of the disc with

no audio signals or very low level inputs.

 If you do, the speakers may be

damaged when the peak level of the sound is played.  The lens on the

disc table should be kept clean. Do not touch the lens or poke at it. If you

do, the lens may be damaged and the unit will not operate properly.

On installation

Never install the unit where it would be subjected to:

- heat sources such as radiators or airducts

- direct sunlight

- excessive dust

- moisture or rain

- mechanical vibration or shock

- unleveled surface

• Do not place any heavy object on top of the unit.

• When the unit is used with an AC power adaptor, do not wrap the unit

in a cloth, blanket, etc. If you do, the temperature inside and outside

the unit may rise considerably, resulting in malfunctioning of the unit

or serious accidents.

• If the unit is brought directly from a cold to a warm location, or is

placed in a very damp room, moisture may condense on the lens

inside the unit. Should this occur, the unit will not operate. In this case,

remove the disc and leave the unit in a warm place for several hours

until the moisture evaporates.

• For the unit to operate at its best, it should not be subjected to

temperatures below 5°C (41°F) or above 35°C (95°F).

Notes on headphones/earphone

Do not use headphones/earphone while driving, cycling, or operating

any motorized vehicle, it may create  a traffic hazard and is illegal in

some areas. It can also be potentially dangerous to play your headsets

PRECAUTIONS

1. Read Instructions

 - All the safety and operating instructions should

be read before the appliance is operated.

2. Retain Instructions

 - The safety and operating instructions should

be retained for future reference.

3. Heed Warnings

 - All warnings on the appliance and in the operating

instructions should be adhered to.

4. Follow Instructions

 - All operating and use instructions should be

followed.

5. Water and Moisture

 - The appliance should not be used near water

- for example, near a bathtub, washbowl, kitchen sink, laundry tub,

in a wet basement, or near a swimming pool, and the like.

6. Ventilation

 - The appliance should be situated so that its location or

position does not interfere with its proper ventilation. For example,

the appliance should not be situated on a bed, sofa, rug, or similar

surface that may block the ventilation openings; or, placed in a

built-in installation, such as a book case or cabinet, that may impede

the flow of air through the ventilation openings.

7. Heat

 - The appliance should be situated away from heat sources

such as radiators, heat registers, stoves, or other appliances

(including amplifiers) that produce heat.

8. Power Sources

 - The appliance should be connected to a power

supply only of the type described in the operating instructions or as

marked on the appliance.

9. Grounding or Polarization

 - Precautions should be taken so that

the grounding or polarization means of an appliance are not

defeated.

10. Power-Cord Protection

 - Power-supply cords should be routed so

that they are not likely to be walked on or pinched by items placed

upon or against them, paying particular attention to cords at

plugs, convenience receptacles, and the point where they exit from

the appliance.

11. Cleaning

 - The appliance should be cleaned only as recommended

by the manufacturer.

12. Nonuse Periods

 - The power cord of the appliance should be

unplugged from the outlet when left unused for a long period of

time.

13. Object and Liquid Entry

 - Care should be taken so that objects do

not fall, and liquids are not spilled, into the enclosure through

openings.

14. Damage Requiring Service

 - The appliance should be serviced by

qualified service personnel when:
A. The power-supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the

appliance; or

C. The appliance has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a

marked change in performance; or

E. The appliance has been dropped, or the enclosure damaged.

15. Servicing

 - The user should not attempt to service the appliance

beyond that described in the operating instructions. All other servicing

should be referred to qualified service personnel.

CAUTION

INVISIBLE LASER RADIATION

WHEN OPEN AND INTER-

LOCKS DEFEATED.

AVOID EXPOSURE TO BEAM

This product contains

a low power laser

device.

CLASS 1 LASER PRODUCT

APPAREIL À LASER DE CLASSE 1

PRODUCTO LASER DE CLASE 1
PRODUTO LASER CLASSE 1

Opening the CD Door

to insert or remove a CD

Play/Pause

Press   to begin play.

Press   during play to pause.

To release pause, press   pause.

 (stop) 

/OFF

 (power off)

Disc playing stops, press again the unit will be

off.

Track search and fast forward/fast reverse

Press 

 lightly/repeatedly:

To locate the beginning of the current selection or

previous selections.

Keep 

 depressed:

To go back at high speed (search)

Press 

 lightly/repeatedly:

To locate the beginning of next selection/

selections.

Keep 

 depressed:

To go ahead at high speed (search)

PRESET/PLAY MODE

Press the PRESET button in RADIO, after the

preset number appear, turn in a station using

preset.

P.MODE button for selecting the various play

mode.

MEMORY/REPEAT/ENTER

Press the MEM(MEMORY) button to storing

stations.

Enter button/Repeat button.

FUNCTION 

(CD/RADIO)

Set to CD or RADIO function.

BAND

Press the BAND button repeatedly to select

AM(MW) or FM to turn on radio.

OFF

Power off

TUNING (DOWN/UP)

Press the TUNING buttons turn into a station.

PHONES jack

For connecting the headphones/earphone.

X-BASS

OFF: normal sound

ON: bass sounds are amplified

Mains socket 

(DC IN 6V)

Volume

Adjust the VOLUME.

ANTI-SHOCK

Press ANTI-SHOCK button to prevent sound

skipping.

M1, M2, M3, M4, M5, M5+

Preset number station buttons

FUNCTION OF CONTROLS

TUNING

BAND 

OFF

PRESET/P. MODE

MEM/REPEAT/ENTER

Using with batteries

Insert two size AA batteries (LR6 or UM-3  alkaline) according to the
" " and " " indications in the battery compartment.

Inserting batteries

Detach the battery cover on the

middle cabinet and insert two

size AA batteries (LR6 or UM-3

alkaline)

Notes on batteries

• Insert batteries with correct polarity.

• Do not use old batteries together with new ones or different types of

batteries together.

• If the electrolyte inside the battery should leak, wipe the contaminated

parts in the battery compartment with a cloth and replace the old

batteries with new ones.

• When the unit is not to be used for a long period of time, remove the

batteries.

• Do not mix old and new batteries.

Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable

(NICKEL-CADMIUM) batteries.

POWER SOURCES

M1~M5

+

Portable Radio/CD Player

Operating Instruction

Before operating the unit, please read this manual thoroughly and

retain it for future reference.

at high volume while walking, especially at pedestrian crossings. You

should exercise extreme caution or discontinue use in potentially

hazardous situations.

Avoid using headphones/earphone at high volume. Hearing experts

advise against continuous, loud and extended play. If you experience a

ringing in your ears, reduce volume or discontinue use.

Keep the volume at a moderate level. This will allow you to hear outside

sounds and to be considerate to the people around you.

If you have any questions or problems concerning your unit, please

consult your nearest dealer.

ANTI-S HOCK

ON/OFF

Summary of Contents for CE148







Reviews: