When you first connect your Sensor 500 and are using Telecom Call Minder
service you will need to program the PLAY button.
•
Press
•
Press and hold down until the display shows text, then release
•
Dial 083210.
•
Press
•
Dial your call minder PIN number. (Please note that this number will
show on the display each time the key is pressed.)
•
Press
#
•
Press
•
Dial “1”
•
Press to store
•
Press to finish.
SENSOR 500 INITIAL SETUP
On pages 5 & 6 of this manual, references to the display showing:”--------”
should read: display showing “INSERT 10/0”
If you are a Centrex user, the phone needs to be programmed to insert “10”
If you are not using Centrex, the phone must be set to insert “0”
•
Press
and hold until diplay shows: “INSERT 10/0”.
•
Press
to select.
•
Press
to select “0” or “10” (current selection will flash).
•
For Centrex “10” must be flashing.
•
For Non-Centrex “0” must be flashing.
•
Press
to set.
Downloaded from:
http://www.guardianalarms.net
