ATIM ARM-IOD-LP Installation Manual Download

Page: 1 / 4

Notice technique complète sur

www.atim.com

FRQIG_ARM-IOD-LP

Page1/4

Before using the product, read carefully the following recommendations:

✔

Do not power supply the radio modem with 110 or 120V (recommended voltage: 10 to 30Vdc).

✔

For your safety, the power supply connection to the radio modem must be realized off voltage. Check that the

module power supply is off before all operations.

✔

Do not use without antenna!

Modem

Type

Mode

Address

Radio channel

Modbus Mirror

Summary of Contents for ARM-IOD-LP

Page 1: ...supply the radio modem with 110 or 120V recommended voltage 10 to 30Vdc For your safety the power supply connection to the radio modem must be realized off voltage Check that the module power supply...

Page 2: ...his antenna can be directly mounting on the l ARM IO ANT868 12S L Antenna wave no needs to metallic planfloor it can be mounting directly on a polyester support of a vehicle or above a PVC case For be...

Page 3: ...bus sensor Configuration Automatic Power supply 3 6V battery withdrawable Max consumption 25mA Rx 60mA to 25mW Tx 15 A in sleep mode Frequency radio 868 000 869 900MHz Puissance max 25mW Radio Modulat...

Page 4: ...ecimal Value AF Register S37 Hexadecimal Value 00 5 CONFIGURATION EN MODE MIROIR The modem configuration can be made in manufactory For erasing the modem configuration Disconnect the battery Run down...