background image

 

                                   

Disassembly Procedure 

                                                                                                                                                                                 

 

                                                                                         

2 - 1

Disassembly Procedure 

Please follow the information provided in this section to perform the complete 
disassembly procedure of  the notebook.    Be sure to use proper tools 
described before. 

SUS W5F Series Notebook consists of various modules. This chapter describes the 
procedures for the complete notebook disassembly.    In addition, in between procedures, 
the detailed disassembly procedure of individual modules will be provided for your 
service needs. 

The disassembly procedure consists of the following steps: 
 

 

Battery Module 

 

HDD Module 

 

Second Memory Module 

 

CPU Module 

 

Optical Drive Module 

 

Keyboard Module 

 

First Memory Module 

 

LCD Module 

 

Top Case Module 

 

Motherboard Module 

 

Mini PCI Module 

 
 
 
 
 

 

 

Chapter 

A

Summary of Contents for W5F
















Reviews: