It is always recommended to anchor the unit to the ground. Drill through
the four holes in each of the base of the unit using 6mm dia masonry drill
to a depth of 70mm. Screw in the anchor fixings. (These have a self
cutting thread). If not anchoring the unit, fit the self seal plugs BEFORE
BUILDING to seal the fixing holes from underneath. Please note
product must be bolted down to comply with LPS1175.
TOOLS REQUIRED
Power driver POSI-DRIV screwdriver, 6mm dia. masonry drill and a
10mm socket or spanner.
CENTURION
LH F
. SIDE P
ANEL
32941
x1
LH R. SIDE P
ANEL
32874
x1
F. BASE P
ANEL
32940
x1
R. BASE P
ANEL
32871
x1
LH DOOR 32943
x1
RH DOOR 32944
x1
FRONT
FASCIA
32948
x1
ZSCREW32
x8
ZSILCO1
x1
ZSCREW04
x4
ZSCREW100
x185
ZSCREW340
x24
32670
x16
10mm
Spanner
18V
ZCOMPPLZS02
x8
ZCOMPPLAS22-23-24
x12
4x 2mm, 4x 3mm, 4x 5mm
BASE COVER CHANNEL
37364
x1
SIDE COVER CHANNEL
32916
x2
ROOF COVER CHANNEL
32918
x2
F. T
OP
PANEL
32986
x1
TOP
SHROUD
32945
x2
R. T
OP
PANEL
32987
x1
RH F
. SIDE P
ANEL
32942
x1
RH R. SIDE P
ANEL
32875
x1
BASE INSTRUCTIONS
Flat and firm base. Recommended: concrete, tarmac or paving flags.
Min. distance from walls/ shrubbery: 1000mm.
Min. base size (WxDxH) 2640mm x 1730mm x 50mm.
LEVELING THE UNIT
Correctly level the constructed unit using the shims (ZCOMPPLAS)
provided prior to fixing the unit to the ground. Slide the packing pieces
under the corners of the unit base as required until an equal gap has
been achieved around the door allowing for its smooth operation and
alignment.
LH BACK P
ANEL
32867
x1
RH BACK P
ANEL
32876
x1
For maintenance instructions of this product visit www.asgardsss.co.uk
Warning: some panels may weigh over 20Kg
Beware of manual handling
Warning: Please keep
this key card safe! Refer
to if replacement key is
required.
x2
SEALANT
00001
YOUR UNIQUE
KEY CODE
ROOF JOINT
STRIP
40446
x2
6mm
Dia.
Posi-Driv
Screwdriver
