Vacuum sealer
AS-V-320
Model:
User Manual
Save These Instructions.
Thank you for purchasing this product.
Read this User’s Manual before using this product,
and make sure to use the product correctly. Misuse
may result in malfunction or unexpected accidents
or hazards.
Table of Contents
page
Safety Warning
２
Operating Instructions ６
Additional Safety
Instructions
４
Specifications
４
Accessories
４
Features
５
Cleaning
11
Troubleshooting
15
Vacuuming Tips
10
Seal Mode
９
Care
14
Check
16
Customer Service
16
Vacuum Mode
７
Available Bags
５
Warranty
１６
Check
To prolong the effective life of the appliance,
please perform a daily performance check.
Product name :
Vacuum Sealer ＨＩＰＰＯ
Model No. :
ＡＳ-Ｖ-３２０
■Do you detect the following signs?
- Dust is accumulated on the outlet, the
connector or electric outlet.
Remove dust.
16
- The power cord or plug is extraordinarily hot.
- The power cord or plug has deep scratches or
deformation.
- There is a smell of burning.
- Moving the power cord may interrupt the electric
current.
- An electric shock is experienced when touching the
unit.
- Other abnormalities or failures are found.
To prevent failures or accidents, turn the
power switch off and unplug the appliance
from the outlet. Consult our company or the
store where you made the purchase for
inspection and repair.
1-11-22, YONBAN, ATSUTA-KU, NAGOYA, AICHI, JAPAN
TEL : 81-52-671-5193 FAX : 81-52-671-5196
E-mail : [email protected] Website : www.asahi-sg.co.jp
Warranty
Warranty period
Model No.
Manufacturing No.
( Serial No.)
Name
Address:
TEL:
Store of purchase
Date of purchase
*Fill in the required information and keep in a safe place.
: months
: AS-V-320
:
:
:
:
:
:
We guarantee quality only for use under normal conditions during the warranty period ( months from date of purchase). If the
product malfunctions during the warranty period, we will repair it at no charge using our prescribed methods. Bring the product
along with the warranty to the store where you purchased the product.
In the following cases, we will charge a fee for repair even during the warranty period.
(1) If no warranty is shown
(2) If the required information is not filled in or is rewritten
(3) If the malfunction was caused by misuse
(4) If the malfunction was caused by impact during shipment or movement by the customer
(5) Malfunction and damage caused by nature, pollution, abnormal voltage, or other outside factor
If it is determined that the customer independently altered or repaired the product, it will not be accepted for repair during the
warranty period.
Repairs and replacements of supplies ( Heating Wires, PTFT strips) that are consumed or deteriorate will incur a charge even during
the warranty period.
The company will not be liable for direct or indirect damage caused by malfunction or use of the product.
Expenses for sending or bringing a product for repair are the responsibility of the customer.
Keep the warranty in a safe place. Warranties will not be reissued.
1.
2.
3.
4.
5.
6.
7.
User Manual & Warranty
SAMPLE
