background image

Choose the best location on vehicle to place the mount. 

Clean off  dash or console surface with alcohol cleaning pad and 
let dry. 

(A)

  Do not attempt application of the dash mount if the 

temperature is below 68

°

 F (20

°

C).

Remove paper liner from adhesive on base 

(B)

 and affi

  x adhe-

sive to the dash or console.  (Let stand at room temperature for 
24 hours before using.)

Adjust the angle of the pedestal head by bending the fl exible 
metal strip 

(C)

. Rotate the strip and tighten the base cap. 

(D)

!

Safety Precautions

Do not install Arkon products over an air bag cover or within the air 
bag deployment zone.  Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or      
air bag deployment. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

The Mobile Mounting Specialists™

Consumer Hotline:

USA

     (800) 841-0884

INT’L

    (626) 254-9005

Monday - Friday 9 am - 5 pm, PST

TT136   

|  Bendable Adhesive Dash or Console Mount for TomTom® GPS

CM021-SB-2 
Benadble Adhesive
Dash Mount

www.arkon.com

Arcadia, CA 91006 USA

Designed in USA | Made in China and Taiwan

© Copyright 2008 Arkon Resources, Inc.

Package Contents:

(1) CM021-SB-2 - Bendable adhesive dash mount
(1) APTTO - Adapter plate for TomTom ONE™ Series
(1) APTTOXL - Adapter plate for TomTom ONE XL / XL • S™ Series
(1) APTTGO520 - Adapter plate for TomTom GO™ Series
(1) APTTEP - Adapter plate for TomTom EasyPort™ Series

Step 1.

Step 2.

Dash or Console Installation

TomTom Device Compatibility:

TomTom ONE 130, ONE 130-S (TomTom EasyPort Mount)
TomTom ONE (US Edition, US 3rd Edition)
TomTom ONE XL (1st Edition) - TomTom ONE XL-S (1st Edition)
TomTom ONE 22, ONE 22 Regional, ONE 22 Regional Traffi

  c

TomTom XL 22, XL 22 Regional (TomTom EasyPort Mount)
TomTom XL 330, XL 330-S (TomTom EasyPort Mount)
TomTom ONE UK / EUROPE (NEW Edition aka 2nd Edition, 3rd Edition)
TomTom GO 520 / 530 / 720 / 730 / 920 / 920T / 930

APTTGO520
Adapter plate for 
TomTom GO

Check Compatibility

APTTOXL
Adapter plate for 
TomTom ONE XL 
and XL • S

Check Compatibility

APTTEP
Adapter Plate 
for EasyPort

Check Compatibility

Patent

Pending

APTTO
Adapter plate for 
TomTom ONE

Check Compatibility

TomTom, ONE, GO, and EasyPort are product names, trademarks, or registered trademarks of 
TomTom International BV.  Arkon Resources, Inc. is not affi

  liated with TomTom International BV. 

Step 1.

Slide the adapter plate up into the grooves on the back of the 
TomTom ONE, ONE XL, or ONE XL • S.

TomTom ONE, ONE XL, and ONE XL • S Plate Installation

Step 1.

Attach the adapter plate by sliding it up into the slot on the 
back of the TomTom GO 520, 530, 720, 730, 920, 920T, and 930 
models device as shown below.

TomTom GO Adapter Plate Installation

!

Do not place mount in or near an air bag deployment zone 
or where it will obstruct view of the road.

A

B

D

C

Reviews: