Flat Wall Installation:
1.Drill 7 holes
2.A.Insert wall anchors inside the holes.
B.Tie the PTFE tape up the joints ,and screw the joints to the water inlet.
C.Fix the fixed base with the long screw onto the wall.
D.Fix the upper mounting bracket with the long screw onto the wall.
3.A.Screw the faucet to the joints placing the mesh gaskets in the water inlet.
B.Insert the fauet to the fixed base ,and fix them with small screws .
C.Insert the little pellet to the faucet for fixing.
D.Insert the main body to the faucet through the ring
E.Fix the main body into the upper mounting bracket , fixed it by small screw ,Push the adoring covers onto the
upper mounting bracket .
F.Connect the shower head to the main body .
G.Connect the hand shower and faucet to the shower hose placing the gaskets in the fastening nuts
Note:
1.Do not forget to use the mesh gasket to prevent leakage on the connection.
2.If find that water pressure or water volume is unsual,please clean the mesh gasket regular
Wall anchors
Long screws
Fixed base
Small screws
Shower hose
Hand shower
Gaskets
Faucet
Main body
Shower head
Little pellet
Jionts
Upper mounting
bracket
Ring
Mesh gaskets
Adoring covers
Small screws
Installation Procedure SL280
GB
