Step By Step Guide
Precision Manufactured in the P.R.C.
Designed in Australia by Aqua One
Distributed in Australia by:
Kong's (Aust.) Pty. Limited
48 Williamson Rd. Ingleburn
2565 NSW Australia
Distributed in New Zealand by:
Kong's (NZ) Limited
52 Glenlyon Avenue, Greerton
Tauranga New Zealand
Distributed in Hong Kong by:
Kong’s Aquarium Supplies Co., Ltd
No 31, 3/F Thriving Industrial Centre
26-38 Sha Tsui Road, Tsuen Wan,
Hong Kong
Distributed in the UK by:
Kong’s (UK) Limited,
C/O Aqua Pacific UK Ltd.
PO Box 268
Romsey Hampshire
SO51 0WW
United Kingdom
www.aquaone.com.au
® Aqua One and Kong’s are registered trademarks.
1. Decide where you are going to position the light.
2. Mount the light on the aquarium and tighten the fastening screws. Hand tight
will be sufficient.
3.Ensure your hand is not wet, plug the transformer in to the power receptacle,
arrange a drip loop and turn on.
4. Turn the light switch on. It is located on the end of the unit.
5. The flexible mount gives you the ability to vary the intensity and angle of the
light.
6. Ensure your aquarium has a glass lid on it.
Know Your Light
a. Switch
b. Cover Screw
c. LED Lamps
d. Casing
e. Flexible Mount
f. Mounting Bracket
g. Fastening Screws
Instruction Version 10/01/2007
Drip Loop
a
b
c
f
e
d
g
Congratulations on your purchase of a quality Aqua One product. This product will last for many years under
normal usage the guarantee commences from the day of purchase. You must provide proof of purchase when you
submit your equipment for repair under guarantee.
The benefits given to the purchaser by the manufacturers guarantee are in addition to all other rights and remedies
which the purchaser has in respect of the equipment under the legislation of the appropriate country of purchase.
Your 2 year guarantee can be extended by a further 1 year upon registration with the distributor. This can be done
online at the address below or by completing the extended guarantee registration card and returning by post to the
address of your country of purchase. www.aquaone.com.au
General Guarantee Conditions:
1. All claims for guarantee service should be made to the place of purchase.
2. You must provide proof of purchase when you submit your equipment for repair under guarantee.
3. This guarantee extends only to defects occurring in materials or workmanship under normal use of the
equipment when operated in accordance with the supplied instructions.
4. Replacement equipment is guaranteed for the remainder of the original manufacturer’s guarantee period.
5. Guarantee does not cover:
a. Cost of freight, postage or the cost of insurance.
b. Service costs arising from failure to correctly adjust the controls of the product or to clean the hoses, filter media,
impellers, pump heads, failure to observe the manufacturer’s instructions or inspections that reveal that the
equipment is in normal working order.
c. Equipment failures caused by misuse, neglect, normal wear and tear, accidental breakage, repairs or
modification by unauthorised persons, lightning strikes, mains voltage fluctuation, earthquakes, vermin infestation
or liquid spillage.
d. Consumables, such as impellers, shafts, filter cartridges, filter media, sponges, wool, light tubes, lamps, bulbs
or starters.
e. In no event will the manufacturer or distributor of that country be liable for any consequential or incidental
damage including, but not limited to loss of livestock, property damage, damage to equipment, appliances or
furnishings arising from the use of this product or from failure of this product.
f. Damaged incurred in transit resulting from inadequate packing.
6. It is recommended that all equipment subject to claim should be prepared for transportation in its original
packaging or other suitable packaging which offers the same degree of protection.
Aqua One - 2 + 1 Year Guarantee
