APQS Lenni Installation Manual Download

Page: 1 / 162

Lenni - Lucey Installation Manual for Standard Table

Welcome to APQS Family!

Thank you for selecting APQS as your longarm quilting company! As a family-owned company, we work

hard to make our “new” family members feel welcome, and we provide lifetime customer support. We

are honored to serve you.

This manual includes the necessary information to assemble your Lenni or Lucey Quilting System.

If you are missing any parts or have received incorrect or damaged parts, please call our Customer

Service Team at 800-426-7233 so we can resolve the problem quickly for you. You can also reach us by

email at

[email protected]

Even if you are not assembling the machine yourself, please read the assembly instructions and

familiarize yourself with their contents. You’ll learn the different part names and will better understand

your set up should you ever need to call us for service.

Every machine purchased directly from APQS includes a free, 6-hour beginner class. Visit our

Event

Calendar

to locate a beginner class near you, or contact your

local dealer

for more information.

Be sure to join the

APQS Quilting Channel

on YouTube – you’ll find video tutorials on everything from

how to thread your machine to how to quilt feathers, along with helpful maintenance videos. Don’t

forget to “like” us on Facebook and follow the “

We Love APQS

” Facebook page!

You’ll also find helpful tips on the APQS website at

www.apqs.com

. Visit the “Resources” and the

“Service and Support” tabs for more videos, our blog, and the answers to the most frequently asked

service questions.

If you have any questions, please contact us. We are here to help!

APQS

1-800-426-7233

Summary of Contents for Lenni



































































































































































Search results

Summary of Contents for Lenni

Reviews:

Related manuals for Lenni

Brands by name

Popular brands

APQS Lenni, Installation Manual

Search results

Summary of Contents for Lenni

Reviews:

Related manuals for Lenni

Brands by name

Popular brands