background image

Water Bottle with Filter

www.clear2o.com  

Customer Service:  1-866-667-0266

Remove all the packing material and any 
stickers from product.

Remove and save this instruction sheet.

Remove filter as instructed below and 
wash bottle and cap with mild soap and 
any dust or residue left from manufacturing.
Do not wash filter.

Fill bottle with water, replace the filter in the 
lid as instructed below and squeeze full bottle 
of water into a sink; this will clean any dust or 
residue left in the filter from manufacturing.

Model

CWB200

1.Pull up Spout

2.Purge Valve

3.Lid

4.Filter (Model Number CWF202)

5.Bottle

     Indicates consumer replaceable parts.

BEFORE FIRST USE

WARNING :  DO NOT PLACE FILTER IN DISHWASHER

1. Twist lid counterclockwise to unscrew 
     and remove.

2. Fill bottle with water from any tap or 
    drinking fountain.

3. Replace lid, screwing clockwise to 
    tighten firmly.

4. Open the spout, tilt the bottle and 
    squeeze gently to get a past flow 
    of clean, filtered water.

 For best results, change water in the 
                 water bottle with filter daily.

Note: 

USING YOUR                   WATER BOTTLE WITH FILTER

1. Remove lid from bottle.

2. Grasping the filter with one hand and the lid 
    with the other, unscrew the filter from the lid.

3. To replace, simply dispose of the old filter and 
    screw a new filter in place.

4. Fill bottle and replace lid; squeeze first bottle 
    of water into a sink to rinse the filter and your                
                  water bottle with filter is ready again! 

REMOVING / REPLACING YOUR                 FILTER              

1. Remove lid from bottle.

2. Remove filter from lid .

3. The lid and bottle can be washed by hand in 
    warm soapy water and rinsed, or they maybe 
    washed in the top track of your dishwasher.

CLEANING              

Important: Do not wash the                filter. 
Never place filter in the dishwasher.  

Important: Always inspect the purge valve for obstructions or a 
deformed seal after cleaning, before reassembling the bottle 
and using again.

It is essential to follow the operational,
maintenance and filter replacement instructions 
for this product to perform as advertised.

For best results, replace filter every 2 -3 months .

Do not microwave the bottle. 

Do not immerse or fill the bottle with boiling bottle.

Do not place the bottle in the freezer or allow it to 
be kept in freezing temperature.

For best results, change water in the                
water bottle with filter daily.   

OPERATING REQUIREMENTS

To purchase replacement filters, or for information on other
                 products, please visit www.clear2o.com 

Water Temperature: Max 85 F - Min 34 F  For cold water use only.

Reviews: