Sennheiser electronic GmbH & Co. KG
Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com
Printed in Germany, Publ. 06/17, 571329/A01
HANDMIC DIGITAL
iPad
iPod
iPhone
Quick Guide
Sound inlet
basket
Microphone table stand
Microphone clamp
LED
Apogee PureDigital Enhanced
A/D conversion circuitry inside
Micro USB to
Lightning/USB
connector
In the box
Overview
Important for iOS Devices
1 HANDMIC DIGITAL microphone
1 Cable 2m, Micro USB/Lightning
1 Cable 2m, Micro USB/USB
1 Microphone clamp
1 Microphone table stand
1 Pouch
1 Quick Guide
1
Safety Guide
Requirements
iOS version: 9 or later
Mac OS version: 10.7.5 or later
PC Version: Windows Vista or later
Connection / Power: Lightning, USB 1.0 or later
Setup
1
Connecting
If you are using a headset,
(1) first connect the headset,
(2) then connect the
HANDMIC DIGITAL
to the
recording device.
By default, you will not hear the
HANDMIC DIGITAL
until input
monitoring is enabled in an app.
Connect the Micro USB connector to the
HANDMIC
DIGITAL
.
Connect the
HANDMIC DIGITAL
to your iOS device,
Mac or Windows PC.
Wrong chosen audio source can reduce the
recording quality.
The last connected microphone will be used as the
audio source. If you are using your headset for input
monitoring, you might record unintentionally via the
headset microphone. To avoid this:
Connect your headphone or headset to your iOS
device first before connecting the
HANDMIC DIGITAL
to the Lightning port.
Ensure that the apps detect the
HANDMIC DIGITAL
as
the last connected microphone.
Lightning port
USB port
571329_0217_A01_QG_HandMicdigital.pdf 1 09.06.2017 08:16:33
