N3300 SERIES QUICK START UP PROCEDURE
(For Detailed Instructions - See User's Manual)
BBF-104832 Rev.A
1. Remove top packing material.
2. Grab printer at midpoints indicated. Carefully lift printer
from box and remove bag.
(CAUTION: Printer Weighs Approximately 45 lbs).
3.
SAVE SHIPPING BOX AND PACKING
MATERIALS!
4. Install ribbon using instructions provided with ribbon box.
5. Align lower front of printer with table edge. (For
improved forms loading and feeding, use the TG-DOC printer
stand available from your distributor).
6. Attach appropriate communication cable from your
computer.
7. Verify correct voltage setting (U.S.A. = 115v).
8. Attach power cord and turn power on.
9. Unlock right tractor and position for form width.
10. Equally space
ALL
paper guides and supports.
11. Open both tractor doors, load form, and close tractor
doors.
12. Verify that left form edge is in line with alignment mark.
13. Adjust right tractor
SLIGHTLY
to remove slack in form
and lock tractor.
(Do Not Over-Tension Form!)
14. Forms should be positioned to feed straight, if not,
reposition forms. (For dual path printers - see User's Manual).
-over-
