Observe Local Plumbing and Building Codes
FRAMING INSTRUCTIONS
1
SAVE FOR FUTURE USE
791175-400 Rev. M
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2009
Princeton™ Bath w/Integral Overflow Models:
2394.202.ICH, 2395.202.ICH, 2396.202.ICH, 2397.202.ICH,
2394.202.IPB, 2395.202.IPB, 2396.202.IPB, 2397.202.IPB,
2394.202.IBS, 2395.202.IBS, 2396.202.IBS, 2397.202.IBS
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is
installed properly, please read these instructions carefully before you begin. (Certain installations may require
professional help.) Also be sure your installation conforms to local codes.
Note recess is 1527 x 864mm (60-1/8 x 34). Cut a 229 x 305mm (9 x 12) hole in sub floor for drain, centered 362mm (14-1/4)
as shown for below floor rough. Locate studs as required, then ensure rough opening dimensions are proper and supports
are plumb and square.
*
Install stringer as shown (346mm [13-5/8] for through the floor drain or 435mm [17-1/8] for above the floor drain.)
AME
RICA
N
STA
NDA
RD
IMPORTANT
The Drain Assembly is enclosed with tub models listed above.
Locate and retain for tub installation
before
discarding tub carton.
1527mm
(60-1/8)
864m
m(34
)
TU
B WI
DTH
LEVELING STRINGER
51 x 102mm (2 X 4)
229 x 305mm
(9 X 12) FLOOR
CUTOUT FOR DRAIN
*346mm
(13-5/8)
464
mm
(18
-1/4)
864mm
(34)
