J29
© 2006 American Standard Inc.
FINISHED
WALL
OR
SPLASH BACK
178mm
(7)
356mm
(14)
38mm
(1-1/2)
MIN.
51mm
(2)
MIN.
B
A
C/L
445mm
(17-1/2)
1-1/4 O.D.
TAILPIECE
1-1/4 O.D.
WASTE
203mm
(8)
165mm
(6-1/2)
178mm
(7)
16mm
(5/8)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
SUPPLIES
AS REQ'D.
305mm
(12)
*
254mm
(10)
*
FINISHED
FLOOR
787mm
(31)
SUGGESTED
FITTING
CENTER-SET
SPREAD
A
27mm(1-1/16)
32mm(1-1/4)
B
102mm(4)
203mm(8)
COVENTRY™
COUNTERTOP SINK
VITREOUS CHINA
COVENTRY™ COUNTERTOP SINK
• Delicate molded-in swirl pattern
• Made from vitreous china
• Self-rimming with cutout template supplied
• Center drain outlet
• Front overfl ow
❏
0575.000
Oval sink without faucet deck
Nominal Dimensions:
445mm x 356mm
(17-1/2" x 14")
Bowl sizes:
394mm (15-1/2") wide
311mm (12-1/4") front to back
133mm (5-1/4") deep
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT:
Dimensions of fi xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
To Be Specifi ed:
❏
Color:
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
Revised 5/06
