K87
© 2008 AS America Inc.
CADET™
ROUND FRONT TOILET
VITREOUS CHINA
NOTES:
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION
OF 305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
IMPORTANT
: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
699mm
(27-1/2)
C/L OF OUTLET
8
3
m
m
(3
-1
/4
)
FINISHED WALL
225mm
(8-7/8)
19mm ± 6mm
(3/4 ± 1/4)
381mm
(15)
419mm
(16-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
305mm
(12)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
762mm
(30)
241mm
(9-1/2)
152mm
(6)
495mm
(19-1/2)
222mm
(8-3/4)
SUPPLY
AS
REQ'D
381mm
(15)
*
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Silver
❏
Fawn Beige
❏
Black
❏
Seat: American Standard #5322.011 “Rise and
Shine” solid plastic closed front seat with cover.
❏
Seat: American Standard #5308.014 “Laurel”
molded closed front seat with cover.
❏
Alternate Seat:
❏
Supply with stop:
CADET™ ROUND FRONT TOILET
❑
2798.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Round front siphon action jetted bowl
• Fully glazed 2" trapway
• AquaForce flushing technology
• Close-coupled tank with raised lip detail on
tank cover
• Color-matched trip lever
• Speed Connect
®
tank/bowl coupling system
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory flush tested
❑
3454.016
Bowl
❑
4112.016
Tank
Nominal Dimensions:
699 x 495 x 762mm (27-1/2" x 19-1/2" x 30")
Fixture only, seat and supply by others
Alternate Tank Configurations Available:
❑
4112.300
Tank complete with chrome all
metal trip lever
❑
4112.500
Tank complete with Aquagard Liner
❑
4112.600
Tank complete with tank cover
locking device
❑
4112.700
Tank complete with Aquagard Liner
and tank cover locking device
❑
4112.800
Tank complete with trip lever located
on right side
❑
4112.900
Tank complete with tank cover device
and trip lever located on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Revised 2/08