background image

GUSA

Two-Stage Gas Fired Warm Air Furnace

User’s Information Manual

10318825  August 2001 (4)

You have purchased a high-efficiency, gas-fired, warm-air residential furnace.  It is

designed to heat your home efficiently and safely.  It is also designed to interface

with your cooling equipment to circulate conditioned air during cooling operation.
Your furnace functions are regulated by an integrated control module which

responds to your home thermostat.  This module controls all aspects of operation,

and is designed to assure efficiency, reliability, comfort, and safety.  The GUSA

furnace has been designed with efficiency and flexibility in mind.  It is capable of

operating on low stage or high stage, in accordance with current heating require-

ments.
The GUSA furnace can be installed in an upright or horizontal position.  It can use

either indoor or outdoor air for combustion purposes.  Use of indoor air, referred to

as non-direct vent (single pipe), requires only a flue pipe; combustion air is drawn

from indoors.  Use of outdoor air, referred to as direct vent (dual pipe), requires

both a flue pipe and a combustion air intake pipe.

WARNING

If the information in these instructions is not followed exactly, a fire or

explosion may result causing property damage, personal injury or loss of

life.

–  Do not store or use gasoline or other flammable vapors and liquids in

the vicinity of this or any other appliance.

– WHAT TO DO IF YOU SMELL GAS:

•

Do not try to light any appliance.

•

Do not touch any electrical switch; do not use any phone in your

building.

•

Immediately call your gas supplier from a neighbor’s phone. Follow

the gas supplier’s instructions.

•

If you cannot reach your gas supplier, call the fire department.

–  Installation and service must be performed by a qualified installer,

service agency or the gas supplier.

&RPIRUW4XDOLW\7UXVW

Heating

®

&

Air Conditioning

®

Summary of Contents for GUSA


















Reviews: