®
TK-1000 TANDEM GATE HARDWARE
INSTALLATION INSTRUCTIONS
If this is the first time attempting a tandem gate installation
please consult ALL-O-MATIC or someone with tandem gate
installation experience. These instructions are guidelines only,
every Tandem Gate installation is unique and has its own unique
measurements. The TK-1000 Tandem Kit was designed to work
with ALL-O-MATIC slide gate operators slowed down to about
50% speed. Please make sure to request a Slowed Tandem
Gate Setup on all gate operators that will be used with the ALL-
O-MATIC Tandem Gate Hardware Kit.
Note: TK-1000 works best with ALL-O-MATIC DC Slide Gate
Operators (SL-100DC and SL-150DC) operators must be slowed
down.
WARNING!
