AIS Net Locator operating
instructions
Unpacking and inspection
Please unpack the product properly and take an
inventory of the accessories according to the
table below. It is recommended that you keep the
box and packaging materials.
Item
Count
Item
Count
Net Locator
1
Manual
1
Power adapter
1
Main features
•
GPS/BeiDou dual-mode precise
positioning, with the possibility of
displaying the position of the
N
et
Locator
on the AIS receiver
•
Display of the
Net Locator
's power status
on the AIS receiver
•
AIS signal transmission interval
configurable
: 0.5 minutes - 10 minutes
•
Waterproof rating: IPX7.
•
Can work continuously for more than 15
days on one charge (transmitting interval
set to 3 minutes)
•
Easy bundling and convenient operation
for switching on and off
Overview
1. Built-in antenna
2. Transparent bottom cover
3. Programming interface
4. Charging port
5. Power switch
6. Charging indicator (red
and yellow)
7. Working light (red and
green)
Notes
The
programming
interface is used to set the
ship name, MMSI code, transmit interval time, call
sign and other extended information. To be set by
the dealer only.
No attempt should be made to remove the panel
of the
N
et
Locato
r as this will cause a leak!
Charging the battery
Before use, the battery should be charged.
Plug the power adapter into the AC power output
socket.
Unscrew
the transparent bottom cover on the
underside of the
Net Locator
.
Remove the plug of the charging port on the
panel of the
Net Locator
and plug the output
terminal of the power adapter into the charging
port to start charging.
When the battery is fully charged, the yellow light
will be illuminated. Charging time is approximately
4 to 5 hours.
After charging, the transparent bottom cover
should be screwed on tightly to ensure water
resistance.
Notes
When charging, please turn the power switch to
OFF (power off).
Do not short-circuit the charging connector.
Use a dedicated power adapter (DC 9.2V / 1A
output), otherwise the unit may be damaged.
