User Manual for FMT250 Bluetooth Car Charger
Thank you for purchasing the
FMT250 Bluetooth Car Charger!
Please read this user manual carefully before using in order to
ensure correct use of proper functions!
Introduction to the Product
The FMT250 Bluetooth car charger that can switch the call to
the hands-free state via the Bluetooth provided your phone is
Bluetooth enabled. When the call is finished, it will be switch
back to music play automatically. You can also play music from
your phone to your cars sound system via Bluetooth. You can
enjoy the music and answer phone calls in hand-free mode
without refitting your car, which ensures the driving safety while
enjoying music.
Schematic Diagram of Appearance
Descriptions of the Schematic Diagram
1.
Volume up/down, / CH+ CH-
2.
Power indicator LED
3.
LINE input hole
4.
Switch off device
5.
Answer/redial
6.
Microphone
7.
Press to hang up/reject a call/Press and hold to switch to CH
FM mode
8.
LED display window
9.
Power adaptor 9V-24V
10.
USB output: 5V
11.
USB output: 5V
Product Features
Any angle adjustable and applicable for all types of vehicles
FM transmitter
LED display window
LINE audio input
Independent Bluetooth start/shutdown button
Answer/hang up/reject/redial via Bluetooth
Bluetooth stereo music play
Call Echo Cancellation and Noise Reduction (CVC)
technology
Dual USB output voltage, provides powers to other devices
and the maximum output is 5V/2.1A
Automatic memory function of power failure frequency
point
Operation Instructions
FM Adjustment
You first want to change the FM transmission on your radio to
match what is on the LED display of the
FMT250 Bluetooth Car
Charger. This ensures that you will hear both the device and your
phones audio through the speakers of your car. You can change
the FM transmission frequency on the FMT250 Bluetooth Car
Charger by doing the following:
Press and hold
key to enter the frequency selection state.
At this time, the frequency on LED window will flash. Press
key to increase/decrease the frequency. Press and hold
key to increase/decrease the frequency more quickly.
Frequency is adjustable within 87.5 - 108MHZ.
Connecting to device via Bluetooth
1.
Plug the FMT250 Bluetooth Car Charger into cigarette
lighter socket and switch the power to ON. The product will
start up and LED will display the frequency point once it is
powered.
2.
If your using this device for the first time, your will need to
pair your phone to this device.
3.
First enable the Bluetooth function on your phone. If the
FMT250 Bluetooth Car Charger is on, search for Bluetooth
devices and make sure that the ‘CAR KIT’ is there. Please
allow a minute or two for the
FMT250 Bluetooth Car
Chargers Bluetooth to initialize if it doesn’t show on your
phone.
4.
Select ‘
CAR KIT
’ and your phone should pair with the
FMT250 Bluetooth Car Charger automatically. A prompt
sound will be given after pairing.
