AEROMOTIVE
Part # 11217
A3000 Regulator Assembly
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of
automotive systems and repair procedures. We recommend that this
installation be carried out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you
are working in a well ventilated area with an approved fire extinguisher
nearby. Extinguish all open flames, prohibit smoking and eliminate all
sources of ignition in the area of the vehicle before proceeding with the
installation.
When installing this product, wear eye goggles and other safety
apparel as needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until
the pressure has been relieved. Refer to the appropriate vehicle service
manual for the procedure and precautions for relieving the fuel system
pressure.
The enclosed Aeromotive regulator utilizes two o-ring sealed ORB-10 style ports, and one
o-ring sealed ORB-08 style bypass port; These ports are NOT PIPE THREAD and utilize NO
THREAD SEALANT. ORB port fittings with the proper o-ring installed are required.
The enclosed Aeromotive fuel pressure regulator is intended to be installed on the outlet
side of an unmodified Aeromotive A3000 Fuel pump, Aeromotive p/n 11216 or 11222. It
must be installed with a return line from the regulator to the top of the fuel tank. It is
designed for the purpose of creating and maintaining stable line pressure in a range
between 14-24 PSI, for carbureted engine applications where a dead-head or static style
regulator is installed at the carburetor(s).
The regulator is not preset from the factory and must be adjusted to 18 psi.
This kit contains the following parts:
1ea 11217 By-Pass Style, HP (High Pressure) Regulator
2ea 1/4-28x 2-1/4" mounting screws
2ea Fuel pump mounting O-Rings (1 required, 1 spare)
Aeromotive system components are not legal for sale or use on emission controlled motor vehicles
Aeromotive Commonly used part numbers for your reference:
15608 ORB-10/AN-10 Port Fitting. (Outlet Fitting)
15607 ORB-08/AN-08 Port Fitting. (By-Pass Fitting)
