background image

1 Startup Manual

Packing List

Before installation, make sure that you have received the 

following:
•  PCI-1752USO card
•  Driver CD
•  Quick Start User Manual
If anything is missing or damaged, contact your distributor or 

sales representative immediately.

User Manual

For more detailed information on this product, please refer 

to the PCI-1752USO User Manual on the CD-ROM (PDF 

format).

Specifications

Declaration of Conformity

FCC Class A

This equipment has been tested and found to comply with 

the limits for a Class A digital device, pursuant to part 15 

of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the 

equipment is operated in a commercial environment. This 

equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the 

instruction manual, may cause harmful interference to radio 

communications. Operation of this equipment in a residential 

area is likely to cause interference in which case the user is 

required to correct interference at his own expense.

CE

This product has passed the CE test for environmental 

specifications when shielded cables are used for external 

wiring. We recommend the use of shielded cables. This kind 

of cable is available from Advantech. Please contact your 

local supplier for ordering information.

Notes

For more information on this and other Advantech products, 

please visit our websites at:
http://www.advantech.com
For technical support and service:

http://www.advantech.com/support/

This startup manual is for PCI-1752USO
Part No: 2003175220

1st Edition
March 2016

ST

AR

TUP MANUAL

Overview

PCI-1752USO

64-channel Isolated Digital Output Card

The PCI-1752USO offers 64 isolated output channels. With 

isolation protection of 2,500 V

DC

, the PCI-1752USO is ideal 

for industrial applications where high voltage protection is 

required.

General  

Isolated Digital Output  

Number of Channels

64

Optical Isolation

2,500 VDC

Opto-isolator response time

100 μs*

Supply Voltage

5 to 40 VDC

Source Current

200 mA max./channel

I/O Connector Type

100-pin SCSI-II female

Dimensions

175 mm x 100 mm ( 6.8" x 3.9" )

Power Consumption

+5V@ 230 mA(typical)
+5v@  500 mA(max.)

Temperature

Operation 0 ~ +60°C (32~ 140°F )
Storage

-20 ~ 70°C (-4 ~158°F)

Relative Humidity

5 ~ 95% RH non-condensing 

(refer to IEC 60068-2-3)

Certification

CE Class A certified

*Response time depends on the computer hardware archi-
tecture and software environment. The rates may vary due to 
programming language, code efficiency, CPU utilization and 
so on.

Summary of Contents for PCI-1752USO

Page 1: ...ables are used for external wiring We recommend the use of shielded cables This kind of cable is available from Advantech Please contact your local supplier for ordering information Notes For more information on this and other Advantech products please visit our websites at http www advantech com For technical support and service http www advantech com support This startup manual is for PCI 1752US...

Page 2: ...itch SW1 on board to set the card s board ID 6 Insert the PCI 1752USO card into a PCI slot Hold the card only by its edges and carefully align it with the slot Insert the card firmly into place Use of excessive force must be avoided otherwise the card might be damaged 7 Fasten the bracket of the PCI card on the back panel rail of the computer with screws 8 Connect appropriate accessories 100 pin c...

Page 3: ...Channel Freeze function input I O Connector Signal Description PIN Name Reference Direction Description IDO 00 15 PCOM0 Output Isolated digital output of group 0 IDO 16 31 PCOM1 Output Isolated digital output of group 1 IDO 32 47 PCOM2 Output Isolated digital output of group 2 IDO 48 63 PCOM3 Output Isolated digital output of group 3 PCOM0 Output Common pin for IDO00 IDO15 for inductive loads PCOM...

Page 4: ...he status of isolated digital output channels are selected by jumper JP1 The following table shows the configuration of jumper JP1 JP1 Power on configuration after hot reset Keep last status after hot reset Default configuration Isolated Outputs Each of isolated output channels comes equipped with a MOSFET polyswitch for current protection and integral suppression diodes for inductive loads Note I...

Reviews: