MOS-1130 User Manual 1
1. Packing List
2. Initial Inspection
MOS-1130Y-0201E Isolated CANBus iDoor Module
User Manual
MOS-1130Y-0201E is a 2-Ports Isolated CANBus mini- PCIe, DB9.
This manual covers the pin assignment for the CAN connector,and the wiring of the two transmission wires.
MOS-1130
miniPCIe Card x 1
DB37 I/O Plate x 2 with iDoor bracket x 1
FPC cable x 2
Startup Manual x 1
Note:
If any of these items are missing or damaged, please contact your distributor or sales representative immediately.
You should find the following items inside the shipping package:
Mini-PCIe communication interface card
Industrial Communication Driver, Utility and mini-PCIe communication card user's manual in DVD-ROM
MOS-1130 was carefully inspected mechanically and electrically before it was shipped. It should be free of marks and
scratches and in perfect working order when received.
As you unpack the MOS Module, check for signs of shipping damage (damaged box, scratches, dents, etc.). If it is
damaged or it fails to meet specifications, notify our service department or your local sales representative immediately. Also
notify the carrier. Retain the shipping carton and packing material for inspection by the carrier.
After inspection we will make arrangements to repair or replace the unit. When you handle the MOS Module, remove
it from its protective packaging by grasping the rear metal panel. Keep the anti-vibration packing. Whenever you remove
the card from the PC, store it in this package for protection.
Warning!
Discharge your body’s static electric charge by touching the back of the grounded chassis of the system unit
(metal) before handling the board. You should avoid contact with materials that hold a static charge such as
plastic, vinyl and Styrofoam. Handle the board only by its edges to avoid static damage to its integrated circuits.
Avoid touching the exposed circuit connectors. We also recommend that you use a grounded wrist strap and place
the card on a static dissipative mat whenever you work with it.
