![background image](http://html1.mh-extra.com/html/advantech/hit-w101c/hit-w101c_quick-start-manual_2858589001.webp)
The drawings and specifications in this document are property of Advantech and may not be reproduced. copied or used without prior written permission.
2)
1)
Page 1 of 2
HIT-W101C Quick Start Manual
(1) HIT-W101C Appearance
Follow below pic to match the mount and HIT-W101C, and use the
screw to fix it from the bottom side
Screw Type: M2.5 x 8mm
(2) Packing List
HIT-W101C x1
Accessory box
This quick start manual x1
Wall Mount Bracket x1
Self-tapping screws x4
Screw M2.5 x2
(3) Front/Rear View
(4) Easy Setup
Power On Computer:
1)
Make sure Equipotential Terminal is connected to
equipotential ground in the hospital.
2) Connect the adapter to Power DC-IN. Please note that using
different adaptors may put the system into risk.
3) When you plug in the DC power, the HIT will power on
directly.
4) DC Input Voltage: The adapter only supply 12Vdc. Power
Consumption: less than 36W
(5) Software Specifications
Please always check Advantech website for free downloading:
http://support.advantech.com/support/new_default.aspx
(6) Cleaning and Disinfecting
During normal use, the HIT (Healthcare Information Terminal)
may become dirty and should be cleaned regularly.
1)
Prepare a cleaning agent per manufacturer’s instruction or
hospital protocol.
2)
Prepare a clean cloth that has been moistened in a
cleaning solution.
3)
Wipe the HIT thoroughly with a clean wipe.
Applicable Cleaning Agents List
No
Cleaning Agents
1
CHLOR-CLEAN (1.7g NaDCC)(1000 ppm available
chlorine)
2
Alcohol, 95% concentration
3
AHP Accel TB
4
Glutaral dehyde [C5H8O2], 2% concentration
5
Isopropyl alcohol [(CH3)2CHOH], 70% concentration
6
Sodium hypochlorite [NaOCl], 10% concentration
Front-view
* Please use the wall mount bracket only.
Rear-view
* Do not immerse or rinse the HIT or its peripherals.
* Do not spray cleaning agents on the chassis
* Do not use disinfectants containing phenol
x1
HIT-W101C Quick Start Manual